6th Int. Conf. on Advances in Materials, Mechanical and Manufacturing and 13th Int. Conf. on Engineering and Innovative Materials (AMMM and ICEIM).

Format:

Book

Author/Creator:

Watari, Hisaki.

Contributor:

Yahaya, Muhammad.

Language:

English

Physical Description:

1 online resource (0 pages)

Edition:

1st ed.

Place of Publication:

Zurich : Trans Tech Publications, Limited, 2025.

Summary:

Selected peer-reviewed extended articles based on abstracts presented at the 6th International Conference on Advances in Materials, Mechanical and Manufacturing & 13th International Conference on Engineering and Innovative Materials (AMMM2024 & ICEIM2024) Aggregated Book.

Contents:

Intro

6th Int. Conf. on Advances in Materials, Mechanical and Manufacturing &amp

13th Int. Conf. on Engineering and Innovative Materials (AMMM &amp

ICEIM)

Preface

Table of Contents

Chapter 1: Processing of Structural Metals

The Effects of MQL Pulse Parameters on Cutting Force, Cutting Temperature and Surface Roughness in Turning Process

Effect of Cold Rolling and Annealing on Grain Refinement of β-Type Ti-13Nb-1.5Ta-3Mo Titanium Alloy

Effect of Cooling Rate on the As-Cast Microstructure of a High Strength Steel Produced in a Large Size Ingot

Influence of Solidifying Layer Peeling on Strip Thickness in Roll Casting

Mechanical Properties of Roll Cast AC2A Aluminum Alloy Strips

Preparation of Functionally Graded Aluminum Alloy Composites with Alumina Dispersant under Gravity Casting

Microstructural Evolution and Corrosion Behavior of Selective Laser Melted 17-4 pH Stainless Steel

Magnetic Field-Assisted Ultrasonic Nanocrystal Surface Modification of Titanium Alloy

Chapter 2: Alloys and Steel

Stress Corrosion Cracking of Aluminum in Chloride-Containing Solution

Fourier Neural Operator for Predicting the Growth of Precipitates in a Binary Alloy

Machine Learning-Based Prediction of Hardness in Electrodeposited Nickel-Tungsten Alloy Coatings

Effect of Zinc Content and Surface Roughness on the Wettability of Magnesium Alloys

Influence of Magnetron Sputtering Parameters on Speckle Characteristics for Application in Microscale DIC of Maraging Steel

Effect of Pre-Strain Condition on the Mechanical Properties of Steel Wire and its Aging Behavior

Effect of Lamellae Modification in Eutectic Al82.70Cu17.30 Alloy on its Electrochemical Performance as Anode Using Symmetric Cell Electrochemical Impedance Spectroscopy.

Relationship between Yield Strength and Cluster Formation of Multi-Component Aluminum Alloys by Monte Carlo Simulation

Chapter 3: Functional Materials

Effect of Sintering Conditions on Properties of Assisted Pressure Sintered Tungsten Materials

Influence of Cockle Shell Ash and Lime on Geotechnical Properties of Expansive Clay Soil Stabilized at Optimum Silica Fume Content

Photoconversion of Carbon Dioxide to Methanol Using Doped-Carbon Quantum Dots/TiO2

Thermodynamic Stability and Density Functional Theory Simulations of Gold Complexes in Ethaline DES Leaching of Refractory Ores at Varied Temperatures

On the Selectivity and Self-Diffusion of CO2 and H2 in Mixed-Layer Zeolitic-Imidazolate Frameworks

Chapter 4: Polymers and Composites

Formulation of Dielectric Composite Material from Ananas Comosus Waste for 5 GHz Microstrip Antenna

The Effect of Sodium Hydroxide and Oxalic Acid Treatments on Water Absorption, Thickness Swelling, and Hardness of Polyester/Ramie Fiber Composites

A Simple and Effective Method for Determining the Shear Moduli of Structural Materials

Investigation of Electro-Mechanical Properties of SR/CNT/SR Flexible Strain Sensor Composites

Electro-Elastic Behavior of Polarized Hydroxyapatite and Barium Titanate Piezocomposite

Investigation of the Abrasion Resistance of Polymer Yarns

Microcrystalline Cellulose Derived from Pineapple Leaf and its Concentration Effect on Polycaprolactone-Based Composite

Dynamic Elastic Properties of E-Glass Randomly Oriented Fiber Reinforced SR GreenPoxy Composite - Experimental and Numerical Analysis

Effect of Heat Treatment on the Mechanical Properties of Electrospun Polymeric Nanofibrous Membranes

Chapter 5: Additive Manufacturing.

Optimization of Infill Parameters for Fused Filament Fabrication (FFF) of Polyether Ether Ketone (PEEK) Using Adaptive Neuro-Fuzzy Inference System (ANFIS)

Peanut Hull as an Alternative Biocomposite for Polylactic Acid Filament in Fused Filament Fabrication 3D Printing

Effect of Rigid Body Motion in Phase Field Simulation of Sintering during Preheating at the Powder Bed Fusion with Electron Beam Conditions

Chapter 6: Machines Research and Design

Development of Small Punch Creep Test Rig, Testing and Validation

Trial Production of Disk Caster for Thin Bar

Melt Drag Twin Roll Caster

Design and Properties Analysis of Coating Removal Actuator by Abrasive Water Jet

Exhaust Emission Analysis of Spark Ignition Engine with Modification of Exhaust Gas Recirculation (EGR), Air Intake Tank, and Swirl Generator

Chapter 7: Computational Mechanics

Turbulent Flow Analysis in an Annular Diffuser Having a Rectangular Twisted Hub

Dynamic Response of a Tube of Heat Exchanger with an Axial Load

Numerical Considerations on Design Parameters of Diffuser Vane Slit

Investigation of Stress and Delamination Behaviors of a Bonded Beam Having Orthotropic Inclusion in Adhesive Layer under Tensile Loading

Modal Analysis of Flax Fiber Reinforced Composite Bridge Using FEA to Support the Design of the Target Bridge Made of Innovative Material

Keyword Index

Author Index.

Notes:

Description based on publisher supplied metadata and other sources.

ISBN:

3-0364-1141-0

OCLC:

1535276001