13th International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC).

Format:

Book

Author/Creator:

Richard, C. (Caroline)

Language:

English

Subjects (All):

Materials science.

Smart materials.

Physical Description:

1 online resource (805 pages)

Edition:

1st ed.

Place of Publication:

Zurich : Trans Tech Publications, Limited, 2026.

Summary:

Selected peer-reviewed extended articles based on abstracts presented at the 13th International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC 2025) Aggregated Book.

Contents:

Intro

13th International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications (THERMEC)

Preface

Table of Contents

Chapter 1: Steel and Pure Metals

Enhancing Cryogenic Strength of Austenitic Stainless Steels through Thermo-Mechanical Controlled Processing and Nitrogen Alloying

Revealing the Microstructure and Mechanical Properties of Rapidly Quenched and Tempered 51CrV4 Steel Processed Via a Continuous Induction Line

Effect of EAF Impurities on Microstructure and Mechanical Properties of Low-Carbon Steels

Impact of Non-Metallic Inclusions and Grain Structures Modified by Fast Heating Annealing on Tensile Properties of a V-Microalloyed High-Mn TWIP Steel

High-Throughput Computational Screening, Non-Metallic Inclusion Analysis, and Microstructural Characterization of a Novel Medium Manganese Steel

Special Steels for the Hydrogen Society

Investigating the Influence of Trace Tantalum on the Microstructure and Mechanical Properties of Niobium Microalloyed Steels

Impact of Aluminum in Comparison to Silicon on Liquid Metal Embrittlement of 3rd Generation AHSS

Evaluating LME Susceptibility in Third-Generation AHSS: The Role of Testing Methodologies and Silicon Concentration

Influence of Quenching Medium on Ordered Phases Formation and Vickers Microhardness of Fe-6.5 Wt%Si

Enhancing Fatigue Performance of Additively Manufactured H13 Tool Steel through Surface Finishing Processes

Influence of Process Parameters Variation on Microstructure and Mechanical Properties of SLM-Printed 316L Stainless Steel

Optimizing Thermal Cycles in Wire-Arc Additive Manufacturing: Investigating Inter-Pass Time and Use of an External Cooling System.

Analysis of Generation and Propagation of Fatigue Crack in Oxygen-Free Copper Using Electron Backscattered Diffraction Method

Automated In Situ Thermomechanical Analysis of Cobalt under EBSD

Dynamic Recovery as a Strengthening Mechanism

Chapter 2: Alloys

Thermomechanical Testing and Precipitation Modelling of Al-Mg-Si Alloys for Hot Forming Applications

Microstructure Evolution of Twin-Roll Cast and Hot-Rolled WZ73 Alloy during the Finishing Heat-Treatment

Anisotropic Mechanical Property-Induced Ductilization (AMID) - A New Mechanism to Simultaneously Improve the Strength and Ductility of Multiphase Alloys

Development of Non-Equimolar CoCrCuFeNi High Entropy Alloys for Aerospace Brazing

Effect of Heat Treatment and Rolling Process on Microstructure and Deformation Behavior in Al-Si Alloy

Effect of Subgrain Boundary Distributions on Extra-Hardening of SPD-Processed Al-3%Mg Alloy

Creep Strength of AlCoCrFeNi High-Entropy Alloy Fabricated by Spark Plasma Sintering

A Unique High-Temperature Deformation Mechanism in a CrMnFeCoNi Alloy

Visualization of Dynamic Deformation Behavior of Al-Mg Alloys Using Electronic Speckle Pattern Interferometry

Effect of Zinc Content on the Hitting Sound Characteristics of Brass

The Effect of Intensification Pressure on the Microstructure of Non-Heat Treated HPDC AlSi9MnVZr Alloy

Microstructural Characterization and Analyses of the Damage in a Ti-Based Alloy by X-Ray Computed Microtomography

Damage Development in Aluminum 2050 Alloy during High-Temperature Loading Studied by Synchrotron Diffraction and Tomography

Microstructure and Young's Modulus of (TiZr)2-x(NbTaMo)x Bio-High Entropy Alloys

Experimental and Numerical Investigation of Mechanical Properties of Laser-Welded Additively Manufactured Inconel 718.

Cyclic Deformation Mechanisms in a 3D-Printed High-Entropy Alloy

In Situ Alloyed Refractory High Entropy Alloy by Laser Powder Bed Fusion

Low Cycle Fatigue Response of Additive Manufactured Advanced Structural Alloys: Insights into High Performance Alloy Fatigue Life

Comparison of Pd-42Cu-10Ni and Pd-30Cu-29.5Ag-0.5Zn as Probe Material in Interfacial Reaction with Sn

Elevated Temperature Mechanical Properties of Harmonic Structure Designed AlCoCrFeNi High Entropy Alloy by MM/SPS Process

Influence of Hierarchical Structure on Mechanical Properties of Additive Manufactured IN718 Alloys

Chapter 3: Coatings and Corrosion Behaviour of Structural Metals

Compositionally Complex Refractory Metal Nitride Coatings: The Effects of V, Nb and Ta on their Structure and Mechanical Properties

Characterization and Effects of Anodized Aluminum Oxide Film on Additively Manufactured AlSi10Mg Alloy

Electrochemical Synthesis of Ni-Co-W-Zr(P) Quinary Medium Entropy Alloy for Enhanced Hydrogen Evolution Reaction

Copper-Nickel Alloy Coating on Cast Iron by Cold Spray: Microstructure and Thermal Analysis

Effects of Changes in Crystal Structure by Plastic Deformation on Corrosion Resistance of Magnesium Alloys

Effect of Grain Size on the Behavior of Exfoliation Corrosion in Cold-Rolled Mg-14Mass%Li-3Mass%Al Alloy

Neutralization of Impurity Elements of Cu and Ni in Mg-Zn Alloy by Dissolution into MgZn2 Phase

Relationship between Maximum Bending Stress and Surface Roughness of AZ31 Magnesium Alloy Fully Corroded in Salt-Water Environment

Multi-Scale Investigation of Oxygen-Induced Damage in Nickel-Based Superalloy Alloy 718

Effects of Alloying Elements on Marine Corrosion Resistance of Structural Steel

Corrosion Fatigue Property of Steel\Aluminum Alloy Weld-Bonded Lap Joint in High Temperature and High Humidity.

Chapter 4: Metal Processing

Forming of Multifunctional Corrugated Cup Using Roller Ball Die

Experimental Studies and Simulation of TRIP-TWIP Roll Bonding

Effect of Wire Electrical Discharge Machining on Hole Expansion Ratio of 1 GPa Low Carbon Low Alloyed Steel

In Situ Synchrotron XRD Analysis of Phase Evolution and its Impact on Mechanical Properties in Quenched and Partitioned Medium-Carbon AHSS

Evaluation of Strain Distribution of Perforated Sheet in Circular Cup Deep Drawing

Effect of Cold-Forming on Mechanical Properties of AHSS Steel

Finite Element Modeling of Electromagnetic Heating

Influence of Si and Process Parameters on the Microstructure and Properties of Continuously Annealed Low C-Nb-Ti Strip Steel

Application of Bi-Modal Milling Process to Fabricate Harmonic Structure Materials

Effect of Annealing Process on Microstructures and Mechanical Properties of Cold-Rolled Martensitic Steels for Automotive Structural Parts

Formulation and Characterization of Stainless Steel-Based Feedstocks for Fused Deposition Modeling: Effects of Binder Composition on Rheology, Printability, Physical, and Mechanical Properties

Laser Surface Hardening of AISI 431 Martensitic Stainless Steel by Using Different Laser Sources

Effect of Intercritical Annealing Temperature to Mechanical Performance of Hot-Rolled Medium Manganese Steel

Research on the Microstructural Evolution of Injection Molded AZ91 and Ultralight LAZ561Ca Magnesium Alloys during Solidification and Heat Treatment: Multiscale Characterizations and Multiphase Field Modeling

Thermomechanical Rolling of Air-Cooled Thick Nb-Ti-V-Ni High Strength Structural Plate

Thermodynamics of Bimetallic Joints between Titanium and Tantalum Produced by Laser Powder Bed Fusion.

Fabrication and Bonding Properties of Joints Formed by Transient Liquid Phase Diffusion Bonding Using Electroplated Films

Chapter 5: Welding and Soldering Processes

Effect of Magnesium and Silicon on Temperature and Mechanical Properties in Refill Friction Stir Spot Welding of Aluminum to Titanium

Formation Mechanism of Dense and Uniform Structure during Tailor Welding of Aluminum Foam Structure Preform

Welding Distortion Control in T-Joint Structure of Al-Sheets by Using Pre-Tension

Microstructural Characterisations of Static Strain Ageing in C-Mn Steel Welds of the Secondary Circuit of Pressurized Water Reactors

Creep Properties of P92 Pipe Weld after Annealing at 600 and 650°C

Application of Electron Beam Welding in the Production of TEMPALOY AA1 and T92 Butt Joints of Pipes Assigned for the Energy Industry

Evolution of Inclusions in Physically Simulated Heat-Affected Zones of a Weld Metal Used with a 500 MPa Offshore Steel

Effect of Thermal Cycle Profile on Thermal Fatigue Life of Sn-3.0Ag-0.5Cu Solder Joints for Wafer-Level Chip Scale Package

Degradation Behaviour of Sn-Ag-Cu Lead-Free Solder Joint with Electrolytic Ni Plated Electrode due to Electromigration

Chapter 6: Polymers, Composites and Ceramic Materials

Gelation, Vitrification and Shrinkage of Thermoset Polymers - Methods for Investigation and Modelling

Microstructural and Morphological Evolution of Novel In Situ Al-15%Mg₂Si-4.5%Si Composite with Strontium Addition

Fabrication and Thermomechanical Processing of Titanium-Based Laminates for Enhanced Performance under High Dynamic Impact

Phase Field Model of Modification of Microstructure of Al-15Mg2Si- 4.5Si Composite by Addition of Sr during Semi-Solid Processing

Effect of Oxygen on Phase Evolution in Al-Y2O3 Nanocomposites by Mechanical Alloying.

Microstructures and Properties of Diffusion Layer Formed at Laminated Interface of Alumina-Particle Dispersed Magnesium Laminated Compacts Fabricated by MM/SPS Method.

Notes:

Description based on publisher supplied metadata and other sources.

Part of the metadata in this record was created by AI, based on the text of the resource.

ISBN:

3-0364-1789-3

OCLC:

1571370822