A Simulation Method for Crankshaft Torsional Vibration by Considering Dynamic Characteristics of Rubber Dampers Dept. of Mech. Engrg. Waseda Univ

Format:

Conference/Event

Author/Creator:

Honda, Yasuhiro, author.

Conference Name:

SAE Noise and Vibration Conference and Exposition (1989-05-16 : Traverse City, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1989

Summary:

This paper refers to a numerical calculation method, in which the transition matrix method is employed. The method estimates torsional vibration amplitude of a crankshaft with a rubber damper by taking the dynamic characteristics of the rubber part into consideration.Firstly, the rubber part is replaced with a three-elemental Maxwell model, which is determined by the results of static tests, such as stress relaxation test, creep test and static torsional test. The basic data used for the determination of the element values on the Maxwell model are obtained by these tests.Secondly, the vibration system of a crankshaft with a rubber damper is replaced with a linear lumped model, in which the torsional stiffness and damping coefficient of the damper rubber part are decided by using the element values of the Maxwell model.Lastly, the calculated results by the transition matrix method in the vibration model are compared with the experimental results and it is shown that the torsional vibration amplitude can approximately analysed by this method

Notes:

Vendor supplied data

Publisher Number:

891172

Access Restriction:

Restricted for use by site license