Low-Speed Vortical Flow over a 5-Degree Cone with Tip Geometry Variations NASA Langley Research Center Hampton, VA

Format:

Conference/Event

Author/Creator:

Chu, J., author.

Conference Name:

Aerospace Technology Conference & Exposition (1988-10-03 : Anaheim, California, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1988

Summary:

An experiment was conducted to measure the surface pressures and sectional side forces on a 5° cone with three nose tips. The nose tips included a sharp, an 8.7% blunt, and a 17.5% blunt nose tip. Rings of pressure orifices were located at 40% and 80% of the model length and the model was rolled from ±180° in 9° increments to determine roll dependence. The sectional side force data for the sharp cone showed a strong dependence on the roll orientation of the model. The blunt nose cone configurations also showed a dependence on roll orientation. The blunt nose configurations were effective in reducing the sectional side force for angles of attack up to 25°. However, at angles of attack greater than 35°, the reduction was no longer significant. Pressure distributions for three angles of attack are presented to highlight details of the flow when: vortex asymmetries are just beginning; the vortices are in a steady asymmetric state; a vortex has shed between the 40% and 80% stations

Notes:

Vendor supplied data

Publisher Number:

881422

Access Restriction:

Restricted for use by site license