Gasoline Engine Combustion The Nebula Combustion Chamber

Format:

Conference/Event

Author/Creator:

de Boer, C. D., author.

Conference Name:

22nd FISITA Congress (2002-07-21 : ., Pennsylvania, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1988

Summary:

In view of the impending exhaust emission and fuel quality legislation in Europe, the motor industry is faced with developing engines giving low levels of HC and NOx emissions while operating on unleaded gasoline and retaining good fuel economy.Ricardo have designed an advanced open chamber combustion system with vertical in-line valves, designated the "Nebula" combustion chamber. The design is based on converting the intake generated air motion into turbulence near to TDC, thus producing a fast burn characteristic. Initial development was carried out on a 86 86mm Hydra single cylinder research engine, where spark plug position and intake port swirl ratio were optimised. This work demonstrated potential of the "Nebula" concept which showed a considerable reduction in HC and NOx emissions at part load.The "Nebula" combustion chamber has been applied to a 1.35 litre engine in a European vehicle. The engine is designed to use single point injection with microprocessor control of fuelling and ignition. The engine also utilises a simple variable geometry intake system which allows high swirl ratios to be used to give good lean mixture operation at light load, without degrading wide open throttle volumetric efficiency. Exhaust emissions and fuel economy potential are demonstrated over the ECE 15 drive cycle

Notes:

Vendor supplied data

Publisher Number:

885148

Access Restriction:

Restricted for use by site license