Using Experimental Modal Modeling Techniques to Investigate Steering Column Vibration and Idle Shake of a Passenger Car Ford Motor Company

Format:

Conference/Event

Author/Creator:

Chiang, S. L., author.

Conference Name:

SAE Surface Vehicle Noise and Vibration Conference (1985-05-15 : Traverse City, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1985

Summary:

An experimental modal model of an early prototype car was constructed and validated against test results. The model was then used to suggest practical hardware modification alternatives which would: (1) shift the steering column resonant frequency away from the idle range, and (2) maintain a low steering column tip vibration within the 600-750 RPM idle range. This model was also used to evaluate the effectiveness of tuning radiator mounts to the overall vehicle idle quality.It was found that a pair of braces from either the steering column bracket to brake pedal bracket or to the cowl top area could improve idle shake of the test vehicle. The driver side brake pedal brace alone is not effective. However, the passenger side brake pedal brace alone is as effective as the two brake pedal braces together. It was found that the radiator mounts on the test vehicle are extremely non-linear. Therefore, tuning the mount to improve idle quality is impractical. This study also illustrates that one model validation alone may not be sufficient to establish the adequacy of the model. Models which provide only "trends" during the validation stage may not be accurate enough for massive hardware modification predictions

Notes:

Vendor supplied data

Publisher Number:

850996

Access Restriction:

Restricted for use by site license