Driver Eye Height and Sight Distance on Vertical Curves Ford Motor Company

Format:

Conference/Event

Author/Creator:

Farber, Gene, author.

Conference Name:

SAE International Truck and Bus Meeting and Exposition (1981-11-09 : Dearborn, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1981

Summary:

Analyses were performed to determine the sensitivity of stopping sight distance on vertical curves to driver eye height and other parameters entering into the stopping sight-distance equations. Sight distance was found to be relatively insensitive to eye height. On a given hill crest, sight distance for a driver whose eye height is 6-inches lower than the design eye height (3.75 ft) is only 5% less than the design sight distance. On the other hand, stopping distance is very sensitive to travel speed, pavement friction and reaction time. For example, a 1.8 mph decrease in speed reduces stopping distance by the same amount that a 6-inch decrease in eye height reduces sight distance. Also, sight distance is about 2.5 times more sensitive to obstacle height than eye height. It is argued that reductions in travel speed since the introduction of the 55-mph speed limit compensate for any recent or projected decreases in driver eye height. In addition, because the hazard posed by a 6-inch high obstacle is dubious, it is suggested that vertical curves designed for that obstacle height probably incorporate a considerable safety factor

Notes:

Vendor supplied data

Publisher Number:

811286

Access Restriction:

Restricted for use by site license