Hydrocarbon Combustion near a Cooled Wall Physics Dept., General Motors Research Labs., Warren, MI

Format:

Conference/Event

Author/Creator:

Blint, R. J., author.

Conference Name:

SAE International Congress & Exposition (1982-02-22 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1982

Summary:

An experimental and theoretical investigation of a flame/wall interface is presented to help understand the phenomenon of one-wall quenching. Special slot burners were designed to permit high spatial resolution, laser probing of the flame/wall interface, often referred to as the wall quench zone. Laser Raman spectroscopy and veiocimetry measurements of the fuel, temperature, and velocity in the flame/wall interface region show that the fuel is consumed rapidly (<5 ms) in spite of the low (~ 1000 K) temperature. Flame ionization detector measurememts ments confirm the absence of exhaust hydrocarbon from these premixed, laminar flames. Measurements of OH near the wall, taken together with a theoretical study of combusting flows for the burner geometry, identify species diffusion of fuel and radicals as the important process in the fuel decay. Relative flame-wall motion was shown to have only a weak influence on the results. These conclusions suggest that one-wall quenching in homogeneous change, Place of publication not identified engines is not a likely source for exhaust hydrocarbons

Notes:

Vendor supplied data

Publisher Number:

820063

Access Restriction:

Restricted for use by site license