Combustion and Emission Characteristics of Multiple Stage Diesel Combustion New ACE Institute Company, Limited

Format:

Conference/Event

Author/Creator:

Hashizume, Takeshi, author.

Conference Name:

International Congress & Exposition (1998-02-23 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1998

Summary:

A new diesel combustion concept termed MULDIC (MUL-tiple stage DIesel Combustion), which can reduce NOx emissions at high load conditions, was studied by means of engine tests, combustion observation, and numerical simulation. In MULDIC, the first stage combustion corresponds to premixed lean combustion, and the second stage combustion corresponds to diffusion combustion under high temperature and low oxygen conditions.The engine tests showed that simultaneous reduction of NOx and smoke could be obtained with MULDIC operation, even at an excess air ratio of 1.4. Fuel consumption was higher compared to conventional operation because of premature ignition of the first stage combustion and extremely late second stage injection. However, optimization of the first stage combustion increased the degree of constant volume combustion, and hence the thermal efficiency was increased. Therefore, NOx emissions from MULDIC were reduced to less than half the values from conventional diesel combustion at the same fuel consumption. In-cylinder combustion observation was carried out in order to clarify MULDIC smoke emission characteristics. In these photographs, a highly sooting luminous flame was observed because the ignition delay was short. This luminous flame disappeared quickly, and since the cylinder temperature was very high, most of the soot oxidized rapidly. Thus, low smoke combustion was obtained

Notes:

Vendor supplied data

Publisher Number:

980505

Access Restriction:

Restricted for use by site license