Development and Performance of Microlith Light-Off Preconverters for LEV/ULEV Precision Combustion, Incorporated

Format:

Conference/Event

Author/Creator:

Roychoudhury, Subir, author.

Conference Name:

International Congress & Exposition (1997-02-24 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1997

Summary:

Reducing light-off time by using low thermal mass preconverters and increasing catalyst conversion efficiencies is one way of reducing cold start emissions and attaining mandated emission standards. Additionally, it is desirable to attain these features in a small, flexible package helping to overcome close coupling design constraints. Such a preconverter with an atypical Microlith metal catalyst substrate geometry and capable of withstanding high operating temperatures using a proprietary catalyst coating technique was tested with a conventional downstream ceramic main brick. This paper explains the physical characteristics and the flow dynamics of this substrate. Development and testing of prototypes were done on a bench scale apparatus and in automobiles. Bench scale catalyst performance and automotive FTP data before and after aging are presented. Automotive tests were done with and without secondary air and with calibrated Air/Fuel bias. Two different preconverter configurations were tested on a 1.9L engine. Data from these tests of a 0.22 L preconverter with 2500 cells/in2 substrate showed rapid light-off with emissions being 40% below ULEV limits after 50k miles of engine aging. A catalyst surface analysis, including micrographs is also presented. A study on the effects of variation of PGM ratios is briefly discussed

Notes:

Vendor supplied data

Publisher Number:

971023

Access Restriction:

Restricted for use by site license