A Superalloy Low Heat Rejection Engine with Conventional Lubrication Colorado State Univ

Format:

Conference/Event

Author/Creator:

Elshindidy, Mohamed, author.

Conference Name:

International Off-Highway & Powerplant Congress & Exposition (1996-08-26 : Indianapolis, Indiana, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1996

Summary:

Low heat rejection engine (LHRE) technology reduces the heat transfer from the gases in the cylinder of an internal combustion engine by insulating the walls of the combustion chamber. This technology has the potential for gains in fuel efficiency, cooling system size decrease, the use of alternative fuels, et cetera Research on many experimental LHRE's has been reported in the literature. However, these engines have used ceramic material and they have two major problems that need to be overcome. They are: (1) the need for a high temperature lubrication system, and (2) brittleness of the ceramics. To overcome these limitations, a novel LHRE design has been developed in this study. In this design, a high temperature superalloy HAYNES®230 (USN N06230)' is used instead of ceramics, and conventional low temperature lubrication can be employed. A 3.5 HP one cylinder low heat rejection Diesel engine was developed in this study and tested for 1001 hours without failure. This demonstrates the durability of this design and viability of 230 alloy in this application. The measured temperature of the combustion surface during the engine operation was greater than 650 °C. The superalloy combustion surface was studied by optical and electron microscopy and the results are presented. The various alternative designs that led to the final successful design are presented

Notes:

Vendor supplied data

Publisher Number:

961743

Access Restriction:

Restricted for use by site license