Contemplation of Nozzle Blockage in Open Jet Wind-Tunnels in View of Different Q Determination Techniques AUDI AG

Format:

Conference/Event

Author/Creator:

Mercker, Edzard, author.

Conference Name:

SAE International Congress & Exposition (1997-02-24 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1997

Summary:

This paper deals with the correction of aerodynamic interference effects taking place between the nozzle of an open jet wind tunnel and a test model. In order to deduce correct aerodynamic coefficients these interference effects have to be allowed for in the determination of the correct wind tunnel speed. In open jet wind tunnels basically two different methods are used to determine the tunnel speed. One is the so-called nozzle-method, utilizing the pressure difference down the nozzle to determine the nozzle exit velocity or tunnel speed. The other procedure is the so-called plenum-method, where the pressure difference between the settling chamber and the surrounding plenum chamber of the test section is measured and used. In this paper it is shown that both methods yield a systematic error, since the velocity distribution in the nozzle differs from the velocity distribution in an unbounded stream measured at the same distance from the model. In order to compensate for this effect a correction factor is derived with the aid of a simple potential flow model

Notes:

Vendor supplied data

Publisher Number:

970136

Access Restriction:

Restricted for use by site license