My Account Log in

1 option

An Engine Test to Measure the Oxygen Storage Capacity of a Catalyst Delphi Energy and Engine Management Systems

SAE Technical Papers (1906-current) Available online

View online
Format:
Conference/Event
Author/Creator:
Theis, Joseph R., author.
Conference Name:
1996 SAE International Fall Fuels and Lubricants Meeting and Exhibition (1996-10-14 : San Antonio, Texas, United States)
Language:
English
Physical Description:
1 online resource
Place of Publication:
Warrendale, PA SAE International 1996
Summary:
An engine-based test has been developed to measure the oxygen storage capacity of a catalyst. The test utilizes the difference in the engine-out and tailpipe A/F ratios following rich-to-lean and lean-to-rich A/F transitions in order to quantify the storage or release of oxygen. The technique also results in the determination of the water-gas shift constant for the tailpipe exhaust. The technique was used to measure the oxygen storage capacity of a fresh catalytic converter at inlet temperatures of 400, 500, and 600°C for catalyst volumes of 1.5L and 2.8L. The procedure was repeated after the converter had been aged at an inlet temperature of 800°C for 20, 40, and 60 hours. The oxygen storage capacities are related to the emissions performance of the converter on A/F ratio sweep tests.For the fresh converter, the calculated oxygen storage capacity increased with temperature. The measured amount of fresh oxygen storage at 600°C was close to the theoretical maximum level for the catalyst washcoat tested. After aging for 20 hrs at 800°C, the oxygen storage capacity at 400°C and 500°C decreased significantly. With further aging, however, the oxygen storage capacity at these temperatures remained fairly steady. The HC, CO, and NOx conversion performance as measured on A/F ratio sweep tests remained very high at all aging conditions, implying that the residual oxygen storage capacity was sufficient for the A/F perturbations on the sweep test.The water-gas shift constants for the fresh 2.8L converter at 400, 500, and 600°C were very close to the equilibrium values at those temperatures. The water-gas shift constants increased with aging, suggesting that the aging decreased the ability of the catalyst to promote the water-gas shift reaction
Notes:
Vendor supplied data
Publisher Number:
961900
Access Restriction:
Restricted for use by site license

The Penn Libraries is committed to describing library materials using current, accurate, and responsible language. If you discover outdated or inaccurate language, please fill out this feedback form to report it and suggest alternative language.

My Account

Shelf Request an item Bookmarks Fines and fees Settings

Guides

Using the Library Catalog Using Articles+ Library Account