Experiments and Computation of Crankshaft Three-Dimensional Vibrations and Bending Stresses in a Vee-Type Ten-Cylinder Engine Iszu Motors Limited

Format:

Conference/Event

Author/Creator:

Kimura, Jouji, author.

Conference Name:

SAE Noise and Vibration Conference and Exposition (1995-05-15 : Traverse City, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1995

Summary:

In a heavy-duty engine with solid-structure crankshaft (in which all crank-throws are arranged radially in different planes), since a torsional deformation in one crank-throw can induce axial and bending deformations in other crank-throws, significant bending stresses can be induced at particular portions in the crankshaft by crankshaft torsional vibrations.In this paper, the correlation between the crankshaft torsional vibrations and the dynamic bending stresses at the front and rear fillets of the No. 1 crank-pin under operating conditions were investigated for a Vee-type 10-cylinder diesel engine. The dynamic bending stresses at the front and rear fillet of the No. 1 crank-pin in the crank-throw plane, and the torsional vibrations at the front end of the crank-pulley, were simultaneously measured under firing conditions. The three-dimensional vibration behavior of the crankshaft was calculated by the dynamic stiffness matrix method.From the experimental and calculated results, the following conclusions were deduced:

Notes:

Vendor supplied data

Publisher Number:

951291

Access Restriction:

Restricted for use by site license