Three-Dimensional Spray Distributions in a Direct Injection Diesel Engine University of Hiroshima

Format:

Conference/Event

Author/Creator:

Yoshizaki, Takuo, author.

Conference Name:

International Off-Highway & Powerplant Congress & Exposition (1994-09-12 : Milwaukee, Wisconsin, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1994

Summary:

Experiments and modeling of a spray impinged onto a cavity wall of a simulated piston were performed under simulated diesel engine conditions (pressure and density) at an ambient temperature. The diesel fuel was delivered from a Bosch-type injection pump to a single-hole nozzle, the hole being drilled in the same direction as the original five-hole nozzle. The fuel was injected into a high-pressure bomb in which an engine combustion chamber, composed of a piston, a cylinder head and a cylinder liner, was installed. Distributions of the spray impinged on the simulated combustion chamber were observed from various directions while changing some of the experimental parameters, such as combustion chamber shape, nozzle projection and top-clearance. High-speed photography was used in the constant volume bomb to examine the effect of these parameters on the spray distributions. The spray distributions obtained in the simulated combustion chamber are compared to the distributions calculated by a spray model based on a multi-package spray model

Notes:

Vendor supplied data

Publisher Number:

941693

Access Restriction:

Restricted for use by site license