The Evaluation of a Computer Controlled Air Pump for Improved Automobile Emissions University of Tennessee

Format:

Conference/Event

Author/Creator:

Snook, Lori M., author.

Conference Name:

International Congress & Exposition (1994-02-28 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1994

Summary:

Proof-of-concept testing was performed to determine the effectiveness of a computer controlled air pump (CCAP) in reducing the unburned hydrocarbons (UHC) and carbon monoxide (CO) emitted from automobile engines. For the initial phase of testing, a prototype CCAP was designed and evaluated on a dynamometer test-stand at the University of Tennessee. This CCAP maintained the engine's exhaust at a stoichiometric air/fuel ratio by utilizing a second oxygen sensor mounted downstream from the catalyst. In this way, the catalyst's conversion efficiency for CO and UHC was always high, even if the engine was running rich. Results of this steady-state testing indicated that the CCAP was able to reduce UHC and CO emissions without a corresponding increase in oxide of nitrogen (NOx) emissions. Additionally, catalyst temperatures did not increase dramatically.For the second phase of testing, the CCAP was installed on a vehicle and four sets of emission tests were performed at the Environmental Protection Agency's Environmental Research Center Annex in Research Triangle Park, NC. As a result of testing, it was determined that the CCAP has merit as a system to decrease CO and UHC emissions during acceleration and power enrichment. However, the CCAP must be activated after the catalyst has lit-off (or it can delay catalyst light-off and result in poor emissions). NOx emissions remained essentially unchanged and catalyst temperatures did not increase by more than 110 °C. Recomendations for further study are made

Notes:

Vendor supplied data

Publisher Number:

940977

Access Restriction:

Restricted for use by site license