My Account Log in

1 option

Measurement of the Wall-Wetting Dynamics of a Sequential Injection Spark Ignition Engine Swiss Federal Institute of Technology (ETH)

SAE Technical Papers (1906-current) Available online

View online
Format:
Conference/Event
Author/Creator:
Onder, Christopher H., author.
Conference Name:
International Congress & Exposition (1994-02-28 : Detroit, Michigan, United States)
Language:
English
Physical Description:
1 online resource
Place of Publication:
Warrendale, PA SAE International 1994
Summary:
In this paper the fuel path of a sequentially injected gasoline engine is discussed. Since a fraction of the injected fuel suffers a delay due to the wall-wetting phenomenon, in transient phases a significant deviation of the air-to-fuel ratio from its setpoint can arise.The amount of fuel on the manifold wall and its rate of evaporation cannot be measured directly. Therefore, the effects of the wall-wetting on exhaust lambda and engine torque have to be considered for the identification of the dynamics.The dynamics of the exhaust-gas-oxygen (EGO) sensor is not negligible for the interpretation of the lambda measurement. Since both the dynamics and the statics of a ZrO2 Sensor are very nonlinear, a normal EGO-sensor is not suitable for these investigations. On the other hand, the engine torque is a good measure for the cylinder lambda when all other effects which lead to torque changes can be eliminated. The engine torque has to be calculated from the load torque and the resulting engine speed.On a dynamic engine test bench step response and frequency response measurements are used for the identification of the wall-wetting dynamics. The measurements are executed on a 6-cylinder 3.4 liter BMW engine with sequential injection. In sequentially injected engines, a wall film can be located at each intake valve. These parallel dynamic systems are multiplexed in input and output as well. This effect can be shown clearly in the measurements. A mathematical model taking into account the multiplexing is given and the parameters are identified
Notes:
Vendor supplied data
Publisher Number:
940447
Access Restriction:
Restricted for use by site license

The Penn Libraries is committed to describing library materials using current, accurate, and responsible language. If you discover outdated or inaccurate language, please fill out this feedback form to report it and suggest alternative language.

Find

Home Release notes

My Account

Shelf Request an item Bookmarks Fines and fees Settings

Guides

Using the Find catalog Using Articles+ Using your account