Comparison of Promising Sustainable C1-Fuels Methanol, Dimethyl Carbonate, and Methyl Formate in a DISI Single Cylinder Light Vehicle Gasoline Engine Technical University of Munich

Format:

Book

Conference/Event

Author/Creator:

Blochum, Sebastian, author.

Contributor:

Fellner, Felix

Hartl, Martin

Mühlthaler, Markus

Sauerland, Henning

Wachtmeister, Georg

Yoneya, Naoki

Conference Name:

SAE Powertrains, Fuels & Lubricants Digital Summit (2021-09-28 : Live Online, Pennsylvania, United States)

Language:

English

Physical Description:

1 online resource cm

Place of Publication:

Warrendale, PA SAE International 2021

Summary:

On the way to a climate-neutral mobility synthetic fuels with their potential of a CO2-neutral production are currently in the focus of the internal combustion research. In this study the C1-fuels methanol (MeOH), dimethyl carbonate (DMC), and methyl formate (MeFo) are tested as pure C1-fuels mixtures and as blends component for gasoline. The study was performed on a single-cylinder engine in two configurations, thermodynamic and optical. As pure C1-fuels the already investigated DMC/MeFo mixture is compared with a mixture of MeOH/MeFo. DMC is replaced by MeOH, because of its benefits in laminar flame speed, ignition limits and production costs. MeOH/MeFo shows benefits in particle number (PN) emissions at a cooling water temperature of 40°C and in high load operating points. But reversed an increase of 60% in NOx emissions related to DMC/MeFo was observed in hot engine conditions. Both mixtures show no sensitivity in PN emissions for rich combustions. Neither triggered by a global rich operating point, nor with a late compression stroke stratified injection with local rich areas. This was also verified in the optical engine. DMC was also used as a blend component for gasoline. Advantages in PN emissions, knock resistance and injector tip coking were observed. Furthermore, to evaluate the knock resistance of the pure C1-fuels, two knock resistant fuels toluol and pure methanol were used as a reference. DMC/MeFo showed the highest knock resistance at the investigated operating point (1500 rpm / 17 bar IMEP / ε=14.91), where the intake air temperature was increased till first knocking combustions were detected. At least DMC/MeFo was used in a fueled pre-chamber to determine the potential of the ultra-low soot combustion inside the pre-chamber. Therefore, the lean limit was extended to λ=2.2 and an indicated efficiency of more than 40% was reached at 7 bar IMEP

Notes:

Vendor supplied data

Publisher Number:

2021-01-1204

Access Restriction:

Restricted for use by site license