Development and calibration of the Large Omnidirectional Child ATD head finite element model Ohio State University

Format:

Book

Conference/Event

Author/Creator:

Katangoori, Divya Reddy, author.

Contributor:

Carlson, Michael

Moorhouse, Kevin

Noll, Scott

Stammen, Jason

Suntay, Brian

Yang, Peiyu

Conference Name:

SAE WCX Digital Summit (2021-04-13 : Live Online, Pennsylvania, United States)

Language:

English

Physical Description:

1 online resource cm

Place of Publication:

Warrendale, PA SAE International 2021

Summary:

To improve the biofidelity of the currently available Hybrid III 10-year-old (HIII-10C) Anthropomorphic Test Device (ATD), the National Highway Traffic Safety Administration (NHTSA) has developed the Large Omnidirectional Child (LODC) ATD. The LODC head is a redesigned HIII-10C head with pediatric mass properties and modified skin material to achieve the biofidelity targets. A dynamic, nonlinear finite element (FE) model of the LODC head has been developed using the mesh generating tool Hypermesh based on the three-dimensional CAD model. The material data, contact definitions, and initial conditions are defined in LS-PrePost and converted to LS-Dyna solver input format. The aluminum head skull is very stiff relative to the head flesh material and was thus modeled as a rigid material. For the actual ATD, the head flesh is form fit onto the skull and held in place through contact friction. In an attempt to identify the matching flesh-skull contact definition in the FE model, a comparative assessment was conducted under four different boundary conditions between head flesh and skull: completely unconstrained, fully constrained, partial constraint at the skull cap boundary, and partial constraint at the jaw. The boundary conditions under consideration influenced how the head flesh separated from the skull during the impact event. It was clear that the nose of the ATD contacted the impact plate during all of the drop tests leading to varying levels of the contact area. For each boundary condition, the viscoelastic material parameters of the flesh were identified using an inverse method that minimizes the difference between measured and predicted acceleration impulse of the head form center of gravity under impact loading. This inverse method resulted in a reasonable match between physical test data and model-simulated data for head impacts from drop heights of 150, 300, and 450 mm at an angle of 60 degrees. Additional model predictions were then compared to head drop tests from the same heights at the HIII-10C specified angle of 62 degrees. The model's skull-flesh contact definition of the partial constraint at the skull cap boundary was selected as the best approach as the model predicted the measured peak accelerations and phase shift for all drop heights between the 60 and 62 degree drop angles

Notes:

Vendor supplied data

Publisher Number:

2021-01-0922

Access Restriction:

Restricted for use by site license