Investigating the impact of gasoline lubricity on the high pressure pumps operation Total Additifs and Carburants Spéciaux

Format:

Book

Conference/Event

Author/Creator:

Thomas, DUBOIS, author.

Contributor:

Cyrille, CALLU

Ludovic, MOISY

Conference Name:

2019 JSAE/SAE Powertrains, Fuels and Lubricants (2019-08-26 : Kyoto, Japan)

Language:

English

Physical Description:

1 online resource cm

Place of Publication:

Warrendale, PA SAE International 2019

Summary:

Ever stringent emissions regulations have led the car manufacturers to optimize the combustion occurring inside Internal Combustion Engines as well as post-treating the emissions coming from the exhaust pipe. In particular, this led in the late 90's to the introduction of high pressure injection systems inside Diesel engines. This created a tricky situation in which at the same time, the state-of-the-art Diesel engines were requiring more lubricity from the fuel (to make the high pressure pump operate in proper conditions) while the lubricity of the fuels were decreasing due to the removal of sulphur and polar compounds. To cope with this, a method for measuring the lubricity of fuels has been developed (id est the HFRR test) and the use of lubricity additives became usual.Lately, as it is the case for Diesel engines, the Gasoline Direct Injection engines are using higher and higher injection pressures. The state of the art GDI engines are currently using injection pressure as high as 500 bar. A lot of work is also currently ongoing on Gasoline Compression Ignition (GCI) engines which use even higher injection pressure (above 1 000 bar). A high injection pressure means that a high pressure pump has to be used and so, proper lubricity has to be brought by the fuel.In this paper, tests on the lubricity of gasoline have been done using a pump bench test and determined how the pumps operate when fueled with various gasoline formulations using either a high amount of aromatics (typical of a refinery with reforming capacities) or a low amount of aromatics (typical of a refinery equipped with alkylation capacities). It also focused on the effect of an acid-type lubricity additive on the pump operations

Notes:

Vendor supplied data

Publisher Number:

2019-01-2213

Access Restriction:

Restricted for use by site license