An Experimental Study on the Knock Mitigation Effect of Coolant and Thermal Boundary Temperatures in Spark Ignited Engines Seoul National University

Format:

Conference/Event

Author/Creator:

Cho, Cho, author.

Contributor:

Ha, Kyoung-Pyo

Kim, Back-Sik

Min, Kyoungdoug

Oh, Sechul

Song, Chiheon

Conference Name:

WCX World Congress Experience (2018-04-10 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2018

Summary:

AbstractIncreasing compression ratio is essential for developing future high-efficiency engines due to the intrinsic characteristics of spark-ignited engines. However, it also causes the unfavorable, abnormal knocking phenomena which is the auto-ignition in the unburned end-gas region. To cope with regulations, many researchers have been experimenting with various methods to suppress knock occurrence. In this paper, it is shown that cooling the combustion chamber using coolants, which is one of the most practical methods, has a strong effect on knock mitigation. Furthermore, the relationship between thermal boundary and coolant temperatures is shown.In the beginning of this paper, knock metrics using an in-cylinder pressure sensor are explained for readers, even though entire research studies cannot be listed due to the innumerableness. The coolant passages for the cylinder head and the liner were separated to examine independent cooling strategies. In addition, piston surface temperature was changed through the oil supply to the piston oil gallery. Toinvestigate the effects on the thermal boundary temperature under knocking conditions, temperatures were measured. Knock mitigation effects were quantified while the coolant temperatures were varied. Quantification in this study consists of two methods: The advancement of the crank angle ignition timing and the expansion of the borderline knock (detonation border line). The different impacts of cooling between PFI (port fuel injection) and GDI (gasoline direct injection) engines and the differences under various S/B (stroke-to-bore) ratios are also shown in this study.After implementation, it was shown that decreasing the coolant temperature in the cylinder head has a greater effect than that of the liner. Furthermore, 4.2 CA and 5 CA of ignition timing advance and 10% and 6.8% of knock load limit expansion were achieved while the coolant temperature was decreased from 85°C to 60°C under 1500rpm and 2000rpm, respectively. GDI engine also showed knock mitigation effects by the coolant temperature decrease. Higher stroke-to-bore ratio led to expanded load limit due to increased knock suppression. However, there was no significant difference in the effect of coolant temperature decrease for various stroke-to-bore ratios

Notes:

Vendor supplied data

Publisher Number:

2018-01-0213

Access Restriction:

Restricted for use by site license