Effects of Prolonged Exposure to UV and Water on Super-Hydrophobic Surfaces at Ambient and Icing Conditions York Univ

Format:

Conference/Event

Author/Creator:

Amirfazli, Amirfazli, author.

Conference Name:

SAE 2015 International Conference on Icing of Aircraft, Engines, and Structures (2015-06-22 : Prague, Czech Republic)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2015

Summary:

AbstractThe surfaces that shed drops helps with mitigation of icing. Shedding of drop depends on surface hydrophobicity, which becomes affected when exposed to water and/or UV. The hydrophobicity degradation of six (Spray SHS, Etched Al SHS, Hydrobead, Neverwet, Waterbeader, and WX2100) different super-hydrophobic surfaces (SHS), exposed to water or UV, were studied from the drop shedding perspective. Two methods were adopted for the hydrophobicity analysis. Among them, one is to study the contact angles (CA) and contact angle hysteresis (CAH) change at static state (id est, no airflow) compared to the untreated surface. The other one is to analyze the change in critical air velocity (Uc) for a given drop exposed to airflow, on water/UV treated surfaces at room temperature (22 °C) and icing conditions (1 and 7 °C). For the water/UV treated surfaces, the static CAH and Uc (for all temperatures tested) for drops on Etched Al SHS, Hydrobead, and Neverwet, were found to be less than the specified value for a surface to deem as under performing. Hence, from the overall analysis, Etched Al SHS, Hydrobead, and Neverwet, are considered retaining their performance fairly well at both room temperature and icing conditions after exposure

Notes:

Vendor supplied data

Publisher Number:

2015-01-2160

Access Restriction:

Restricted for use by site license