My Account Log in

1 option

Urea Decomposition at Low Temperature in SCR Systems for Diesel Engines Tsinghua Univ

SAE Technical Papers (1906-current) Available online

View online
Format:
Conference/Event
Author/Creator:
Tang, Tang, author.
Contributor:
Cao, Dongxiao
Shuai, Shi-jin
Zhang, Jun
Conference Name:
SAE 2014 International Powertrain, Fuels & Lubricants Meeting (2014-10-20 : Birmingham, United Kingdom)
Language:
English
Physical Description:
1 online resource
Place of Publication:
Warrendale, PA SAE International 2014
Summary:
AbstractSelective catalytic reduction (SCR) has been demonstrated as one of the most promising technologies to reduce NOx emissions from heavy-duty diesel engines. To meet the Euro VI regulations, the SCR system should achieve high NOx reduction efficiency even at low temperature. In the SCR system, NH3 is usually supplied by the injection of urea water solution (UWS), therefore it is important to improve the evaporation and decomposition efficiency of UWS at low temperature and minimize urea deposits.In this study, the UWS spray, urea decomposition, and the UWS impingement on pipe wall at low temperature were investigated based on an engine test bench and computational fluid dynamics (CFD) code. The decomposition of urea and deposits was analyzed using thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC) and fourier transform infrared spectroscopy (FTIR).The TGA experiment shows that urea decomposition started at about 150°C, and exhibited two stages of rapid mass loss. The off-gas in each stage was mainly NH3 and HNCO respectively.In tailpipes the decomposition rate of the injected urea was significantly influenced by the exhaust temperature. At 185°C about 20% urea decomposed and produced NH3. The UWS wall film had formed at low temperature and resulted in urea deposits. The TGA and DSC experiments showed that most of the deposits formed and sampled below 180°C were urea crystal, and the urea deposits in the tailpipes could decompose gradually at high exhaust temperatures. The deposits formed after several WHTC tests at the inlet of the SCR catalyst was also sampled and analyzed by TGA and DSC, which proposed to be cyanuric (CYA) acid, and started to decompose at about 300°C
Notes:
Vendor supplied data
Publisher Number:
2014-01-2808
Access Restriction:
Restricted for use by site license

The Penn Libraries is committed to describing library materials using current, accurate, and responsible language. If you discover outdated or inaccurate language, please fill out this feedback form to report it and suggest alternative language.

My Account

Shelf Request an item Bookmarks Fines and fees Settings

Guides

Using the Library Catalog Using Articles+ Library Account