My Account Log in

1 option

Direct In-cylinder CO2 Measurements of Residual Gas in a GDI Engine for Model Validation and HCCI Combustion Development Brunel University

SAE Technical Papers (1906-current) Available online

View online
Format:
Conference/Event
Author/Creator:
Zhang, Zhang, author.
Contributor:
Campbell, Bruce
Peckham, Mark
Zhao, Hua
Conference Name:
SAE 2013 World Congress & Exhibition (2013-04-16 : Detroit, Michigan, United States)
Language:
English
Physical Description:
1 online resource
Place of Publication:
Warrendale, PA SAE International 2013
Summary:
An accurate prediction of residual burned gas within the combustion chamber is important to quantify for development of modern engines, especially so for those with internally recycled burned gases and HCCI operations. A wall-guided GDI engine has been fitted with an in-cylinder sampling probe attached to a fast response NDIR analyser to measure in-situ the cycle-by-cycle trapped residual gas. The results have been compared with a model which predicts the trapped residual gas fraction based on heat release rate calculated from the cylinder pressure data and other factors. The inlet and exhaust valve timings were varied to produce a range of Residual Gas Fraction (RGF) conditions and the results were compared between the actual measured CO2 values and those predicted by the model, which shows that the RGF value derived from the exhaust gas temperature and pressure measurement at EVC is consistently overestimated by 5% over those based on the CO2 concentrations. The implications for engines with internally recycled burned gases and HCCI combustion development were considered. It is shown that there is an optimum valve overlap period for a given operating condition that produces highest indicated thermal efficiency and optimised combustion phasing. In addition, the minimum residual gas concentration should be employed for the least pumping loss during the recompression process when the negative valve overlap method is used to achieve CAI/HCCI combustion for a given engine output
Notes:
Vendor supplied data
Publisher Number:
2013-01-1654
Access Restriction:
Restricted for use by site license

The Penn Libraries is committed to describing library materials using current, accurate, and responsible language. If you discover outdated or inaccurate language, please fill out this feedback form to report it and suggest alternative language.

Find

Home Release notes

My Account

Shelf Request an item Bookmarks Fines and fees Settings

Guides

Using the Find catalog Using Articles+ Using your account