Computational Study of Combustion Optimization in a Heavy-Duty Diesel Engine Using In-Cylinder Blending of Gasoline and Diesel Fuels Navistar Incorporated

Format:

Conference/Event

Author/Creator:

Zhang, Zhang, author.

Contributor:

De Ojeda, William

Wickman, David

Conference Name:

SAE 2012 Commercial Vehicle Engineering Congress (2012-10-02 : Rosemont, Illinois, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2012

Summary:

Low temperature combustion through in-cylinder blending of gasoline and diesel offers the potential to improve engine efficiency while yielding low engine-out soot and NOx emissions. This investigation utilized 3-D KIVA combustion simulation to guide the development of viable dual-fuel low temperature combustion strategies for heavy-duty applications.Model-based combustion optimization was performed at 1531rpm and 11 bar BMEP for a 12.4 L heavy-duty truck engine. Various engine operating parameters were explored through design of experiments (DoE). The parameters involved in the optimization process included compression ratio, air-fuel ratio, EGR rate, gasoline-to-diesel ratio, and diesel injection strategy (id est, single-diesel injection vs. two-diesel injections, diesel injection timings, and the split ratio between two-diesel injections). Optimal cases showed near zero soot emissions and very low NOx emissions. Moreover, fuel consumption was improved 11-13% over baseline diesel operation. Compared to a compression ratio of 16, a compression ratio of 14 was found to require a lower gasoline-to-diesel ratio and provide improved fuel consumption. Suitable diesel injection strategies and recommended air system targets were identified

Notes:

Vendor supplied data

Publisher Number:

2012-01-1977

Access Restriction:

Restricted for use by site license