The Effect of Wheel-Setting on Wear of Pneumatic Tires

Format:

Other

Author/Creator:

HALE, J. E., author.

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 1927

Summary:

THE author compares tread-wear of front and rear tires. Considering wear of rear tires as normal wear he analyses the abnormal wear observed on front tires and traces it to its causes, which are found to be camber, toe-in and imperfect geometrical layout of steering-arms and linkages.A theory of the scuffing action is developed. It is due partly to various rolling diameters at different parts of the tire tread and partly to the setting of the two front wheels so they tend to roll in slightly different directions. Reducing the camber angle to deg. and the toe-in to 1/16 inches, reduces both these errors and results in longer tire-wear.No definite theory for camber is found. Toe-in depends on camber, counteracting the tendency of cambered wheels to diverge. A method is described for testing accuracy of rolling action by means of paper on a greased floor.Service stations must be put in a position to test and correct toe-in and camber. Fine tie-rod adjustment should be provided in the design, and factory engineers should recommend only accurate and foolproof gages for this work.Except for difference in degree these problems are alike on all classes of automotive vehicles and with all types of tires. Standardized settings of camber and toe-in would be very desirable.Experience with "camber wear" is described in the discussion. An adjustable and graduated model for studying the effects of pitch, toe-in, camber, and caster is described and illustrated. Conclusions are drawn agreeing with those in the paper

Notes:

Vendor supplied data

Publisher Number:

270048

Access Restriction:

Restricted for use by site license