"Bump Test" of Wet Friction Materials: Modeling and Experiments Technical Center, Raytech Composites, Incorporated

Format:

Conference/Event

Author/Creator:

Zhao, Wenping, author.

Conference Name:

SAE 2001 World Congress (2001-03-05 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2001

Summary:

In one of the fatigue tests for wet friction materials, "bump test", an inertia-type rig equipped with a multi-disk assembly is used. One of the steel disks in the assembly has radial bumps for the purpose of creating high local contact pressure and high temperature. Due to the severe contact conditions, a comparative testing for different friction materials can be conducted within a relatively small number of cycles. In the paper, a design of a "bump" assembly used for automotive wet friction materials is described. Based on both experimental tests and advanced contact modeling, non-uniform contact pressure generated by the bumps and resulting temperature are estimated. The computational model is used then to study the influence of the modulus of elasticity of the friction material and reaction plate thickness on the contact conditions. The bump fatigue tests lead ultimately to material failure. The modes of the failure obtained during the tests are demonstrated and commented on in the paper

Notes:

Vendor supplied data

Publisher Number:

2001-01-1154

Access Restriction:

Restricted for use by site license