Simulating Performance of a Parallel Flow Condenser Using Hydrocarbons as the Working Fluids Valeo Climate Control

Format:

Conference/Event

Author/Creator:

Mathur, Gursaran D., author.

Conference Name:

Vehicle Thermal Management Systems Conference & Exposition (2001-05-15 : Nashville, Tennessee, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2001

Summary:

Performance of a parallel flow condenser is simulated by using hydrocarbons as the alternative refrigerants. The performance of the condenser is simulated with Propane (R-290), Isobutane (R-600a), and 50/50 mixture (by weight) of Propane and Isobutane. The performance is compared to a system with R-134a as the working fluid. For a given condenser heat rejection capacity, the refrigerant mass flow rates for hydrocarbon refrigerants are significantly lower than R-134a. However, the heat transfer coefficients are comparable in magnitudes to the base case (R-134a) which results in heat transfer rates that are very close to that of the base case. Hence, the simulated rate of heat transfer for hydrocarbon refrigerants is very close (within ±3%) to that of R-134a system. The pressure drop for hydrocarbon refrigerants are significantly lower in comparison to R-134a. The simulated thermal performance has been compared with the experimental test data obtained from the system bench. The simulated performance is within ±9% of the experimental data. Thermal and hydrodynamic performance data along with design considerations have been presented in this paper

Notes:

Vendor supplied data

Publisher Number:

2001-01-1744

Access Restriction:

Restricted for use by site license