Finite Element Simulation and Experimental Validation of V-Ribbed Belt Tracking University of Missouri

Format:

Conference/Event

Author/Creator:

Xu, Minjie, author.

Conference Name:

SAE 2001 World Congress (2001-03-05 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2001

Summary:

A general three-dimensional finite element model was built to simulate the tracking conditions inherent in automotive front-end accessory drives, specifically, serpentine V-ribbed belt drives. Commercial finite element code ABAQUS was used for the simulation. The analysis is based on a hyper-elastic material model for the belt, and includes the effect of the reinforced cords and fibers in the rubber compound. The model can be used to study different parameters of the belt drive system such as rib number, pulley misalignment, drive wrap angle and drive speed. Experiments were used to validate the finite element model. Belt misalignment force of two, four and six ribbed belts under different misalignment conditions was obtained from experiment and compared with the results from the finite element model. Good correlation between these results brings confidence to the finite element model. Finally, typical FEA simulation results for a six-ribbed belt are presented

Notes:

Vendor supplied data

Publisher Number:

2001-01-0661

Access Restriction:

Restricted for use by site license