Experimental Measurements of V-Ribbed Belt Tracking Lateral Forces University of Missouri-Rolla

Format:

Conference/Event

Author/Creator:

Castle, James B., author.

Conference Name:

SAE 2000 World Congress (2000-03-06 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2000

Summary:

Two instrumented pulleys were developed to empirically measure the dynamic lateral forces of V-Ribbed belts used in automotive accessory drives. The first test pulley utilizes two cantilever beams cut into the pulley with strain gauges attached to measure the lateral dynamic forces in each individual belt rib caused by misalignment. A test stand which simulates multiple accessory drive configurations at low-end drive speeds typical in automotive engines was implemented to create the dynamic response necessary. This test stand allows variations in lateral offset, toe, camber, tension, and span length, as well as in the speed of the system through a variable speed AC motor. The second test pulley utilizes a unidirectional load cell oriented to measure the total lateral force on the test pulley. After conducting static calibration tests of the two experimental systems, dynamic results were obtained using real time data acquisition. The experimental findings were then compared with finite element analysis simulation results

Notes:

Vendor supplied data

Publisher Number:

2000-01-0912

Access Restriction:

Restricted for use by site license