Technology Levers for Meeting 2027 NOx and CO2 Regulations Eaton Corporation

Format:

Book

Conference/Event

Author/Creator:

McCarthy, Jr., James E., author.

Contributor:

Matheaus, Andrew

Zavala, Bryan

Conference Name:

WCX SAE World Congress Experience (2023-04-18 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource cm

Place of Publication:

Warrendale, PA SAE International 2023

Summary:

Commercial vehicles require fast aftertreatment heat-up to move the SCR catalyst into the most efficient temperature range to meet upcoming NOX regulations while minimizing CO2. The focus of this paper is to identify the technology levers when used independently and also together for the purpose of NOX and CO2 reduction toward achieving 2027 emissions levels while remaining CO2 neutral or better. A series of independent levers including cylinder deactivation, LO-SCR, electric aftertreatment heating and fuel burner technologies were explored. All fell short for meeting the 2027 CARB transient emission targets when used independently. However, the combinations of two of these levers were shown to approach the goal of transient emissions with one configuration meeting the requirement. Finally, the combination of three independent levers were shown to achieve 40% margin for meeting 2027 transient NOx emissions while remaining CO2 neutral. These independent levers and combinations were also quantified for meeting the new Low Load Cycle. This paper shows which combinations of technologies meets both the transient emission cycles and low load cycles for NOx with adequate margin while also saving CO2

Notes:

Vendor supplied data

Publisher Number:

2023-01-0354

Access Restriction:

Restricted for use by site license