Structure and Behaviour Characteristics of Aluminum Nickel- Zinc Alloy by Spray Forming Sri Krishna College of Engineering and Technology, Departmen

Format:

Book

Conference/Event

Author/Creator:

Srinivasan, V.P., author.

Contributor:

Anandan, R.

Bharani Kumar, S.

Santhosh, S.

Sasidharan, R.

Conference Name:

International Conference on Trends in Automotive Parts Systems and Applications (2023-12-21 : Kuniamuthur, Coimbatore, India)

Language:

English

Physical Description:

1 online resource cm

Place of Publication:

Warrendale, PA SAE International 2024

Summary:

The microstructure of the alloy and the manner in which it responds to heat treatment has been investigated. The alloy was aged at 550OC when it was initially spray-formed, or when its thickness was decreased by 38%. Before further aging of some specimens, a four-hour solution treatment at 1015OC was performed. The subsequent phase was a cold deformation that was barely 60% of the sample's initial thickness. The alloys' electrical conductivity and hardness may be evaluated based on how long they had been created. Following solution treatment and cold rolling, the alloy's peak hardness was around 380 kgf/mm2. In samples aged immediately under spray-produced conditions, the maximum peak hardness of 255 kgf/mm2 was attained. Conductivities in freshly cold-rolled samples could reach up to 75% of the standard for annealed copper internationally. It looks at the microstructural features of this alloy in this context, paying close attention to how various processing conditions affect them

Notes:

Vendor supplied data

Publisher Number:

2023-01-5120

Access Restriction:

Restricted for use by site license