Future Emissions Following 800,000 Mile Aging Using CDA and a Low Power Electric Heater Emitec Technologies

Format:

Book

Conference/Event

Author/Creator:

Krämer, Jan, author.

Contributor:

Karrer, Ben

McCarthy, James

Rice, Michael

Sharp, Christopher

Zavala, Bryan

Conference Name:

2024 Stuttgart International Symposium (2024-07-02 : Stuttgart, Germany)

Language:

English

Physical Description:

1 online resource cm

Place of Publication:

Warrendale, PA SAE International 2024

Summary:

Engine and aftertreatment solutions have been identified to meet the upcoming ultra-low NOx regulations on heavy duty vehicles in the United States. These standards will require changes to current conventional aftertreatment systems for dealing with low exhaust temperature scenarios while increasing the useful life of the engine and aftertreatment system. Previous studies have shown feasibility of meeting the US EPA and California Air Resource Board (CARB) requirements. This work includes a 15L diesel engine equipped with cylinder deactivation (CDA) and an aftertreatment system that was fully DAAAC aged to 800,000 miles. The aftertreatment system includes an e-heater (electric heater), light-off Selective Catalytic Reduction (LO-SCR) followed by a primary aftertreatment system containing a DPF and SCR. The e-heater was capable of providing up to 10 kW, however for the purpose of this project, lower power settings of 2.5 kW and 5 kW were studied in combination with CDA for lowest possible CO2 emissions. Test cycles included the heavy duty FPT (hot and cold), a low load cycle, a beverage cycle, and a stay hot operation. The data found in this study show how the application of a low power e-heater enables an engine with CDA and an aftertreatment system after 800,000 miles aging to meet ultra-low NOx emissions with minimum CO2 penalty

Notes:

Vendor supplied data

Publisher Number:

2024-01-3011

Access Restriction:

Restricted for use by site license