Oxygenated Fuels as Reductants for Lean NOx Trap Regeneration

Format:

Book

Conference/Event

Author/Creator:

Sandhu, Navjot Singh, author.

Contributor:

Ting, David

Yu, Xiao

Zheng, Ming

Conference Name:

WCX SAE World Congress Experience (2024-04-16 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource cm

Place of Publication:

Warrendale, PA SAE International 2024

Summary:

The push for environmental protection and sustainability has led to strict emission regulations for automotive manufacturers as evident in EURO VII and 2026 EPA requirements. The challenge lies in maintaining fuel efficiency and simultaneously reducing the carbon footprint while meeting future emission regulations. Alcohol (primarily methanol, ethanol, and butanol) and ether (dimethyl ether) fuels, owing to their comparable energy density to existing fuels, the comparative ease of handling, renewable production, and suitable emission characteristics may present an attractive drop-in replacement, fully or in part as an additive, to the gasoline/diesel fuels, without extensive modifications to the engine geometry. Additionally, lean and diluted combustion are well-researched pathways for efficiency improvement and reduction of engine-out emissions of modern engines. Modern internal combustion engines typically employ various in-cylinder emission reduction techniques along with a multi-stage exhaust after-treatment system to comply with emission standards. Lean NOx trap (LNT) is one such aftertreatment system that can reduce the tailpipe NOx under lean conditions at a cost of fuel efficiency penalty due to regeneration. This penalty can be partially mitigated by using in-cylinder NOx reduction methodologies. In the present study, the impact of oxygenated fuels (ethanol and dimethyl Ether) on the regeneration of LNT catalyst under various lean burn exhaust conditions is investigated. The regeneration characteristics of the oxygenated fuels are compared to those of conventional gasoline fuels. Relevant engine-out exhaust conditions from SI and CI engines, including flow, temperature, and exhaust species, operating at different dilution conditions were replicated on a heated aftertreatment flow bench. A comprehensive analysis of species before and after the catalyst sections was performed using Fourier-transformed infrared (FTIR) and mass spectrometers to study and quantify the conversion and formation of species, including ammonia, methane, and hydrogen, under different catalyst conditions. The conversion selectivity of different species is also investigated. The results show that gasoline, ethanol and DME can act as effective reductants for LNT regeneration. LNT catalyst achieves the maximum storage efficiency at 350°C regardless of the reductant used. The NOx conversion efficiency of LNT increases unidirectionally with temperature

Notes:

Vendor supplied data

Publisher Number:

2024-01-2132

Access Restriction:

Restricted for use by site license