The Effects of Pilot Injection on Combustion in Dimethyl-ether (DME) Direct Injection Compression Ignition Engine Korea Advanced Institute of Science and Technology

Format:

Conference/Event

Author/Creator:

Yoon, Hyeonsook, author.

Conference Name:

8th International Conference on Engines for Automobiles (2007-09-16 : Capri (Naples), Italy)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Naples, ITALY Consiglio Nazionale delle Ricerche 2007

Summary:

Dimethyl-ether combustion with pilot injection was investigated in a single cylinder direct injection diesel engine equipped with a common-rail injection system. Combustion characteristics and emissions were tested with dimethyl-ether and compared with diesel fuel. The main injection timing was fixed to have the best timings for maximum power output. The total injected fuel mass corresponded to a low heating value of 405 joules per cycle at 800 rpm. The fuel quantity and the injection timing of the pilot injection were varied from 8 to 20% of the total injected mass and from 50 to 10 crank angle degrees before the main injection timing, respectively. Ignition delay decreased with pilot injection. The effects of pilot injection were less significant with DME combustion than with diesel. Pilot injection caused the main combustion to increase in intensity resulting in decreased emissions of hydrocarbons, carbon monoxide and particulate matter. The NOx emission with diesel combustion was increased because of the activation of main combustion by pilot injection. On the contrary, in DME combustion, the NOx emission was decreased below that of single injection when the pilot ratio was more than 12%

Notes:

Vendor supplied data

Publisher Number:

2007-24-0118

Access Restriction:

Restricted for use by site license