Development of an official test method for on-board PM measurements from Heavy-Duty diesel engines in the European Union European Commission - DG Joint Research Centre, Institute for Environment and Sustainability - Transport and Air Quality Unit

Format:

Conference/Event

Author/Creator:

Rubino, L., author.

Conference Name:

JSAE/SAE International Fuels & Lubricants Meeting (2007-07-23 : Kyoto, Japan)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2007

Summary:

Portable Emissions Measurement Systems (PEMS) are becoming part of the emissions control regulations, as evidenced by the latest requirements introduced in the United States regulations for on-highway and non-road machinery. The European Union is currently following the same route to check the in-use behaviour of heavy-duty diesel vehicles. The current research programmes tend to demonstrate that both the instrumentation and the test methods are mature for gaseous emissions. For PM emissions, the development of portable PM instruments and their test protocols remain a complex challenge, as simultaneous progress take place in the engine after-treatment technologies and the official homologation procedures (the PMP programme in particular).The present paper discusses the current research strategy proposed in the EU for the development of an on-board PM test protocol. Case studies from the EU-PEMS project are presented.Portable commercial PM instruments are evaluated under controlled laboratory conditions (id est on reference test cycles) against reference laboratory instruments using a Euro III heavy-duty engine running on different fuels, including bio-fuel. Other supporting instruments, measuring real-time soot or the total PM composition, are also used. Under these test conditions, the study has demonstrated the equivalency between the tested portable technology and its laboratory counterpart.Another part of the work is to evaluate the applicability of the methodology for on-board testing: results and lessons learned from on board measurements conducted on diesel city buses on urban test routes are presented and discussed showing very good test-to-test repeatability. Issues, such as filter handling and conditioning on board, need particular attention for the adaptation of the test method to the future generations of vehicles

Notes:

Vendor supplied data

Publisher Number:

2007-01-1946

Access Restriction:

Restricted for use by site license