Characterization of Autoignition in a Knocking SI Engine Using Heat Release Analysis Automotive Products Research Laboratory, Hitachi America Limited

Format:

Conference/Event

Author/Creator:

Borg, Jonathan M., author.

Conference Name:

Powertrain & Fluid Systems Conference and Exhibition (2006-10-16 : Toronto, Canada)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2006

Summary:

AbstractIn this paper, we investigate the effects of autoignition on the heat release characteristics of a spark-ignition (SI) engine, under knocking conditions. In a normal, flame-propagation combustion, the heat release rate increases smoothly to a maximum, and then progressively decreases as the entire mixture is consumed. When autoignition occurs, the heat release rate profile shows a departure from its normal profile: since autoignition results in an explosive combustion, an abnormal rapid increase in heat release rate is generated, with significantly higher peak heat release rates and faster fuel consumption. Three distinct heat-release-rate profiles for autoignition can be identified at different engine speeds, which differ in the phasing of the sudden increase in release rate due to autoignition, relative to the peak release rate due to normal combustion. At higher engine speeds, the autoignition-induced heat release rate peak can be clearly discriminated since it occurs after the peak release rate of normal combustion. This is normally not the case at lower engine speeds. In the paper, an algorithm to reliably determine autoignition for the 3 types of heat-release-rate profiles will be presented, followed by a study to characterize the heat release at different engine speeds

Notes:

Vendor supplied data

Publisher Number:

2006-01-3341

Access Restriction:

Restricted for use by site license