Wear and Corrosion Evaluation of Electric Fuel Pumps with Ethanol/Gasoline Blends LFS - Laboratório de Fenômenos de Superfície - EPUSP

Format:

Conference/Event

Author/Creator:

Rovai, Fernando Fusco, author.

Conference Name:

2005 SAE Brasil Fuels & Lubricants Meeting (2005-05-11 : Rio De Janiero, Brazil)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2005

Summary:

The automotive electrical fuel pumps for gasoline and alcohol fueled vehicles engines are lubricated by the fuel itself. The new flexible fuel engine technology, specially in Brazil, the fuel pump is designed to be lubricated by gasohol (E22) or strait hydrated ethanol fuel but it is also exposed to the variable gasoline/alcohol blends in the flex-fuel engines. This paper presents the influence of different fuel blends, ethanol and gasohol, to the fuel pump wear and corrosion behaviors. The tested fuel pumps were designed for gasohol only engines. The fuel pumps were tested in a bench device, which simulates the vehicle fuel circuit, using gasohol (E22), hydrated ethanol (E100) or 60 % in volume ethanol-gasoline mixture (E60). The scanning electron microscopy examinations and roughness measurements were performed for tribological analysis of fuel pump gears. The observed wear and/or other deterioration mechanisms were mainly due to the abrasion and corrosion. The tests showed that abrasion mechanisms were more pronounced in the E22 fuel and the corrosion mechanisms were more damaging in the E60 and E100 fuels. The fuel pumps gears lubrication regime was calculated and the tested fuels lubricities were also measured

Notes:

Vendor supplied data

Publisher Number:

2005-01-2196

Access Restriction:

Restricted for use by site license