Loading and Regeneration Analysis of a Diesel Particulate Filter with a Radio Frequency-Based Sensor Filter Sensing Technologies, Incorporated

Format:

Conference/Event

Author/Creator:

Sappok, Sappok, author.

Contributor:

Bromberg, L. (Leslie)

Parks, J. E. (James E.)

Prikhodko, Vitaly

Conference Name:

SAE 2010 Powertrains Fuels & Lubricants Meeting (2010-10-25 : San Diego, California, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2010

Summary:

Accurate knowledge of diesel particulate filter (DPF) particulate matter (PM) loading is critical for robust and efficient operation of the combined engine-exhaust aftertreatment system. Furthermore, upcoming on-board diagnostics regulations require on-board technologies to evaluate the status of the DPF. This work describes the application of radio frequency (RF) - based sensing techniques to accurately measure DPF particulate matter levels. A 1.9L GM turbo diesel engine and a DPF with an RF-sensor were studied. Direct comparisons between the RF measurement and conventional pressure-based methods were made. Further analysis of the particulate matter loading rates was obtained with a mass-based total PM emission measurement instrument (TEOM) and DPF gravimetric measurements.Comparison with pressure drop measurements show the RF technique is unaffected by exhaust flow variations and exhibits a high degree of sensitivity to DPF particulate matter loading and good dynamic response over transient operating conditions. Additional computational work further illustrates the potential for spatially-resolved RF measurements. Based on the experimental results, the RF technique shows significant promise for improving DPF control enabling optimization of the combined engine-aftertreatment system for improved fuel economy and extended DPF service life

Notes:

Vendor supplied data

Publisher Number:

2010-01-2126

Access Restriction:

Restricted for use by site license