An Optimal Usage of Recent Combustion Control Technologies for DI Diesel Engine Operating on Ethanol Blended Fuels Kyoto University

Format:

Conference/Event

Author/Creator:

Mohammadi, Ali, author.

Conference Name:

2004 SAE Fuels & Lubricants Meeting & Exhibition (2004-06-08 : Toulouse, France)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2004

Summary:

The aim of this study is to find strategies for fully utilizing the advantage of diesel-ethanol blend fuel in recent diesel engines. For this purpose, experiments were performed using a single-cylinder direct injection diesel engine equipped with a high-pressure common rail injection and a cold EGR system. The results indicate that significant PM reduction at high engine loads can be achieved using 15% ethanol-diesel blend fuel. Increasing injection pressure promotes PM reduction. However, poor ignitability of ethanol blended fuel results in higher rate of pressure rise at high engine loads and unstable and incomplete combustion at lower engine loads. Using pilot injection with proper amount and timing solves above problems. NOx increase due to the high injection pressure can be controlled employing cold EGR. Weak sooting tendency of ethanol-blend fuel enables to use high EGR rates for significant NOx reduction. Above finding indicates that low level of PM and NOx emission with no fuel consumption penalty is achievable when diesel-ethanol blend is used with combination of modern combustion control methods

Notes:

Vendor supplied data

Publisher Number:

2004-01-1866

Access Restriction:

Restricted for use by site license