Microstructure and Mechanical Properties of Welded Thermoplastics Dana Corporation

Format:

Conference/Event

Author/Creator:

Lu, Y. Charles, author.

Conference Name:

SAE 2004 World Congress & Exhibition (2004-03-08 : Detroit, Michigan, United States)

Language:

English

Physical Description:

1 online resource

Place of Publication:

Warrendale, PA SAE International 2004

Summary:

Thermoplastics have been used increasingly for automobile components for both interior and under-the-hood applications. The plastic parts are made through various molding process such as compression molding, injection molding and blow molding. For parts with large or complicated geometry, small portions of the part may have to be molded first, then joined together using a welding process. The welded regions usually exhibit inhomogeneous and inferior mechanical performance compared to the bulk regions due to the differences in thermal history.The microstructures and mechanical properties of welded thermoplastics have been examined using hot-plate welded polyethylene. The specimens are prepared at various thermal conditions to simulate the real welding process. The thermal properties in welds are monitored using DSC (Differential Scanning Calorimetry) and the crystallinities are calculated. The microstructures in welds are examined using optical microscope and TEM (transmission electron micrograph) and smaller lamellar size is observed. The mechanical properties of the weld are examined using tensile test and special-constructed microindentation test. Both tests show that the mechanical properties in the welds are inferior to that in the bulks but they can be improved by proper heat treatments such as annealing

Notes:

Vendor supplied data

Publisher Number:

2004-01-0732

Access Restriction:

Restricted for use by site license