Intelligent Technologies for Scientific Research and Engineering / edited by S. Kannadhasan [and four others].

Format:

Book

Contributor:

Kannadhasan, S., editor.

Language:

English

Subjects (All):

Technological innovations.

Physical Description:

1 online resource (175 pages)

Edition:

First edition.

Place of Publication:

Singapore : Bentham Science Publishers Pte. Ltd., 2023.

Summary:

This reference is a compilation of work from different technology groups that give an insight into strategies used for technology optimization and technical R&D. Each of the 14 chapters presented in the book are contributed by engineering experts and focus on different aspects of smart technologies. The chapters cover a wide range of technical disciplines with a list of references for further reading. The compilation demonstrates methods that are useful to apprentices and researchers involved in the development of technologies in different fields: · Wireless networking · Signal processing · Control and machine engineering · SOC design · Materials science and nanotechnology · Biomedical engineering · Power electronics The contributions in this book provide interesting examples for product development such as custom nanomaterials, digital electronics, smart devices and antennas. The content also serves as a reference for designing special components used for complex systems like wireless communication systems, automated control systems and organic waste processing systems. The content is structured in a format suitable for both learners and advanced researchers, making this reference essential to engineers at all levels.

Contents:

Cover

Title

Copyright

End User License Agreement

Content

Foreword

Preface

List of Contributors

Antenna Technologies for Wireless Communication Systems

M. Krishna Kumar1,*, Kanagaraj Venusamy2 and M.C Madhu3

INTRODUCTION

WIRELESS ANTENNA

ANTENNA APPLICATIONS

CONCLUSION

CONSENT FOR PUBLICATION

CONFLICT OF INTEREST

ACKNOWLEDGEMENTS

REFERENCES

Software Defined Networking Concepts, Applications and Wireless Communication

S. Abarna1,*, M. Krishna Kumar1 and Kanagaraj Venusamy2

WIRELESS NETWORKING

SOFTWARE DEFINED NETWORKING

Impact of Device Parameters on the Modulation Characteristics of Temperature Dependent Quantum Cascade Lasers

P. Ashok1,* and M. Ganesh Madhan2

1. INTRODUCTION

2. CHARACTERISTICS OF TEMPERATURE DEPENDENT QCLS

3. A) IMPACT OF NUMBER OF STAGES (M)

B). IMPACT OF MIRROR REFLECTIVITY (R1=R2=R)

C). IMPACT OF TERMINAL VOLTAGE (V)

D). IMPACT OF SPONTANEOUS EMISSION FACTOR

4. ANALOG MODULATION CHARACTERISTICS

5. CONCLUSION

An Advanced Study on Temperature Affected Electro-optic Properties of In0.73Al0.07Ga0.20As/InP in Fiber-optic Communications under Bi-modes

Pyare Lal1,*

SIMULATED NANOSTRUCTURE AND THEORETICAL PARAMETERS

COMPUTATIONAL RESULTS AND DISCUSSIONS

Protein-Peptide Docking: An Initiation to Discover Therapeutic Peptides

B. Aarthi Rashmi1, Harishchander Anandaram2,* and S. Sachin Kumar2

METHODS

RESULTS

CONCLUDING REMARKS

CONFLICT OF INTEREST.

ACKNOWLEDGEMENTS

Performance Evaluation of an IoT-Enabled Rapid Composter for Mixed Organic Wastes

P. Balaganesh1,*, E.K. Hirthick Guhan1, D. Ranjith1, V. Gopalakrishnan1, R. Gnanadesigan1, R. Rameswari1 and M. Vasudevan1

IoT-Enabled Bins

MATERIALS AND METHODS

Design and Fabrication of Smart and Rapid Composter

Setting Up of Rapid Composter

Installation of Microcontroller

Selection of Temperature Controller

Installation of Temperature and Humidity Sensor (Dht11)

Using Liquid Crystal Display (LCD) with I2C Sensor

Datasheet to Note the Sensor Values

Feeding Waste into the Smart Composter

RESULTS AND DISCUSSION

Temporal Variations of Temperature

Impact of Moisture on Co-composting

Temporal Variations of pH and EC

Temporal Variations of TOC and TN

Design and Analysis of Position Sensorless Brushless DC Motor Drive

K. Ramanujum1,*, K.K. Saravanan2, P. Harikrishnan3 and R.J. Kavitha4

Modelling of PM BLDCM

State Space Modeling

Estimation and Controller block

Simulation

Results and Discussion

Study of Physical and Chemical Properties of High Energy Storage Bio Polymer Materials

K. Sushita1,*, N. Janaki1, E.N. Ganesh1 and N. Shanmugasundaram1

EXPERIMENTAL

RESULTS AND DISCUSSIONS

Design of CNT Polymer Composite Based Strain Sensor to Study the Effect of Humidity and Electrical Conductivity

E.N. Ganesh1,*, K. Sushita1, N. Janaki1 and N. Shanmugasundaram1

EXPERIMENTAL SETUP

MATERIALS.

TEST SETUP

PIEZORESISTIVITY OF CNT COMPOSITES FOR STRAIN SENSING

EFFECT OF HUMIDITY ON ELECTRICAL

Characteristics of Bridgeless Boost Converter Fed Bldcm and Improvement of Pf Under Different Loads

S. Swapna1,* and N. Shanmugasundaram2

MODELLING AND SIMULATION ANALYSIS OF BL-BOOST CONVERTER FED BLDC MOTOR DRIVE

Circuit Diagram Representation of BL-Boost Converter

Mode 1-Vs&gt

0, Q1 is Switched ON

Mode 2-Vs&gt

0, Q1 and Q2 is Switched OFF

Mode 3-Vs&lt

0, Q2 is Switched ON

Mode 4-Vs&lt

ANFIS-PID CONTROLLER WITH BL-BOOST CONVERTER FED BLDC MOTOR DRIVE

MATLAB SIMULINK OF PROPOSED ANFIS-PID WITH BL-BOOST FED BLDC MOTOR DRIVE

Performance Characteristics of The Proposed BL-Boost PFC Converter fed BLDC Motor Drive

Performance Analysis Under Supply Voltage Variation

Comparison Based on Power Quality Issues Using PFC BL-Boost-DICM Converter

Power Transmission in Multiple EV Using Harris Hawks Optimization-based SOC Balancing Technique

K. Sushita1,*, N. Janaki1, N. Shanmugasundaram1 and R. Krishnakumar1

HHO ALGORITHM FOR OPTIMIZATION

SOC BALANCING TECHNIQUE

LAYOUT OF PROPOSED FOPID CONTROLLER

PERFORMANCE ANALYSIS

Effect of Disc Offset Distance on Transverse and Torsional Vibration of Rotor Shaft

Mirasaheb Moula Jamadar1, Prasanta Kumar Samal1,* and Imran M. Jamadar1

EXPERIMENTAL MODAL ANALYSIS

Modeling and Characterization of Carbon Nano Tube Nanocomposites

N. Janaki1,*, K. Sushita1, A.L.Wisemin Lins1 and T.R. Premila1

MODELING CNT COMPOSITE

FABRICATION AND CHARACTERIZATION OF CNT NANOCOMPOSITES

Effect of Filler Material Type on Dynamic Behaviour of Composite Beams

an Experimental Study

Charanaraja Naik1, Prasanta Kumar Samal1,*, B. Hulugappa1, B. Suresha1, Imran M. Jamadar1 and Pramod Kumar Malik2

EXPERIMENTAL DETAILS

EFFECT OF FILLER MATERIAL TYPE ON DYNAMIC BEHAVIOUR OF COMPOSITE BEAMS

Effect of Filler Material Type on Natural Frequency of Beam

Effect of Filler Material Type on Damping Ratio of Beam

Subject Index.

Notes:

Description based on publisher supplied metadata and other sources.

Description based on print version record.

Includes bibliographical references.

ISBN:

9789815079395

9815079395

OCLC:

1394118083