Engineering materials : properties and processing technologies : special topic volume with invited peer-reviewed papers only / edited by Denis B. Solovev [and six others].

Format:

Book

Contributor:

Solovev, Denis B., editor.

Language:

English

Subjects (All):

Materials--Technological innovations.

Materials.

Physical Description:

1 online resource (311 pages)

Edition:

First edition.

Place of Publication:

Zurich, Switzerland : Trans Tech Publications, [2023]

Summary:

Special topic volume with invited peer-reviewed papers only.

Contents:

Intro

Engineering Materials: Properties and Processing Technologies

Preface

Table of Contents

Chapter 1: Composites, Polymers and Ceramics

Analysis of the Upshot of Heat Treatment on Properties of Magnesium Hybrid Composites

A Comparative Study of the Effect of Natural Fillers Embedded in Jute/Basalt Hybrid Composite

Performance and Mechanical Characterization of Tufted and Untufted Woven Pine Apple Leaf Fibre Reinforced with Poly Lactic Acid Green Composites

Effect of Electrical Poling on the Structural, Dielectric, and Photoluminescence Properties of Eu3+ Substituted Eco-Friendly Ferroelectric Material Na0.5Bi0.5TiO3

Impetus Yield of Acrylic Top Cover Pyramid Solar still due to Furthered Thermal Conductivity of MnO2 and PANI-MnO2 Nanocomposite Materials

MWCNT Filled Banana-Rice Husk Epoxy Hybrid Natural Fiber Polymer Composites

Macrostructure and Fracture Behaviour of Rice Husk and MWCNT Dispersion Strengthened Alkali Treated Banana Fiber Matrix Hybrid Composites

Experimental Study of Fiber Orientation on the Mechanical Properties of Glass Fiber Reinforced Thermoplastic Composites

Processing and Mechanical Properties of (Hf-Ta-Zr-Nb-Ti)C

A Study of the Relationship between the Rate of Return Strain of Polytetrafluoroethylene on Time, Mechanical Stress and Dose of Electron Irradiation

Predicting the Climatic Resistance of the Material and the Durability of the Structural Elements of the Composite Tower of the Power Line

Development of Digital Models of Physical and Mechanical Characteristics of Biodegradable Polymers Using the Example of Compositions Based on Low Density Polyethylene with Natural Rubber

Mathematical Modeling in Studying the Electrophysical Properties of Syndiotactic 1,2-Polybutadiene

Research of Moisture Sorption by Laminated Composite Materials.

Influence of Filler Concentration on the Mechanical Properties of a Polymer Composite

Materials for the Needs of Agriculture Based on Biopolymers: A Comparative Analysis of Physical and Mechanical Properties

Study of Thermal Aging of the PCM Using Acoustic Emission and Optical Microscopy

Development of Heat-Resistant Composite Foam Material

Studies of Dielectric Characteristics of Polymer Films in a High-Frequency Electromagnetic Field

Material Parameter Assessment for Noise-Absorbing Devices in Shoe Heels

Chapter 2: Microstructure, Properties and Processing of Structural Metals

Microstructure Analysis of Progressive Secondary AlSi7Mg0.6 Alloy with Higher Fe Content Using Electron Metallography Techniques

Comparison of Microstructure and Properties of Nickel-Copper Alloy Prepared by Casting and Laser Powder Bed Fusion Process

Formation of Sulphides in As-Cast GOES Thin Strips

Characterisation of a San Mai Steel Composite for the Manufacture of Knives

Numerical Simulation of the Welding Process during the Main Circulation Pump Impeller Repair

A Study of Cut Surface after the Abrasive Water Jet Application on the MS1 Material Prepared by DMLS Method

The Influence of Progressive Cladding Technologies on Layers Quality

Chapter 3: Building Materials

Creep of Foam Concrete from the Position of the Hereditary Theory of Aging

Durability of Asphalt Concrete with Mineral Fillers Made of Non-Carbonate Raw Materials

The Effect of the Dispersion Nickel Slag Additive on the Strength of Ceramic Bricks

Mechanical Properties of Sand-Cement Mortar with Different Water/Cement Ratio under Thermal Gradient Conditions

Aging of Structural Materials Modified with Polymer Additives in Cold Climate Conditions

Analysis and Development of Innovative Concrete Compositions in the Republic of Bashkortostan.

Nonlinear Modeling of Heat Distribution during a Concreting Beam, Using a Heating Electric Wire

Mineral Fillers Influence on Structure Formation and Properties of Asphalt Concrete

Increasing Sedimentation Stability of Cement-Mineral Suspensions by Adding the Hydroxyl-Containing Water-Soluble Polymers

Development of Acoustic and Thermal Insulation Materials from Pantyhose Waste

Flattening of Bamboo Culm while Softening in Palm Oil and Subsequent Mechanical Characterization

Potential Construction Applications of Sustainable 3D Printed Elements Made from Plastic Waste

Thermal and Flammability Properties of Flame Retardant Phase Change Material for Buildings Applications

Additive Manufacturing with Environmentally Sustainable Materials for Shell Envelop System

Green Building Materials: Mechanical Performance and Environmental Sustainability

Keyword Index

Author Index.

Notes:

Description based on publisher supplied metadata and other sources.

Description based on print version record.

ISBN:

3-0364-1274-3

OCLC:

1375298220