Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XII / Jonas Zmuidzinas, Jian-Rong Gao, editors.

Format:

Book

Contributor:

Zmuidzinas, Jonas, editor.

Gao, Jian-Rong, editor.

Language:

English

Subjects (All):

Infrared detectors.

Physical Description:

1 online resource

Place of Publication:

[Place of publication not identified] : SPIE, 2024.

Contents:

Front Matter: Volume 13102

Imagers and Polarimeters I

NEW-MUSIC: The Next-generation Extended-Wavelength MUltiband Sub/millimeter Inductance Camera

CCAT: design and performance of densely packed, high-frequency, dual-polarization kinetic inductance detectors for the Prime-Cam 850 GHz module

CMB Instruments I

In-flight performance of SPIDER's 280 GHz receivers

Commissioning the CMB polarization telescope GroundBIRD with the full set of detectors

New Instruments and Concepts I

The key science drivers for the Atacama Large Aperture Submillimeter Telescope (AtLAST)

Concept camera for the next-generation mm-wave cosmological surveys CMB Instruments II

MNTES: modeling nonlinearity of TES detectors for enhanced cosmic microwave background measurements with LiteBIRD

MISTRAL: technical commissioning and first W-band photons from the Sardinia Radio Telescope

Breadboard model assembly and characterization of a sapphire achromatic half-wave plate for LiteBIRD low-frequency telescope

Detectors

Transition edge sensor arrays for future FIR space missions

The W-band LEKID array of the MISTRAL instrument

Highly sensitive far-IR KIDs for PRIMA: optical characterization of a 25-micron array

Optics and Components I

Spectrometers I

Virtually Image Phased Array (VIPA): demonstration of the next generation direct detection spectrometer for velocity resolved spectroscopy in the far-infrared

FINER: Far-Infrared Nebular Emission Receiver for the large millimeter telescope

Coherent Receiver Technology Possibilities and limitations of the offline scheme frequency transfer method 4×2 hot electron bolometer mixer arrays for detection at 1.4, 1.9, and 4.7 THz for a balloon borne terahertz observatory

Development status of wideband millimeter-wave receivers for LMT-FINER

ALMA Band 8 version2 receiver upgrade project

Development of an SIS mixer-based amplifier for large-scale multipixel heterodyne receivers

ALMA2030 Band-4+5 receiver front-end wideband sensitivity upgrade: first year initial development and future plan

New Instruments and Concepts II BISOU: a balloon pathfinder for CMB spectral distortions studies

CONCERTO: instrument model of Fourier transform spectroscopy, white-noise components

Innovative octave band quad ridge feed horn and vacuum window for next-generation radio observatories

Multiplexing and Readout I

A first demonstration of active feedback control and multifrequency imaging techniques for kinetic inductance detectors

The CRS: a scalable full-stack control system for microwave kinetic inductance detectors

Detectors III

Design of ultra-low-noise AlMn transition edge sensor for far-infrared applications

Design and characterization of kinetic inductance detectors for the next-generation OLIMPO experiment

Spectrometers II

CCAT: a status update on the EoR-Spec instrument module for Prime-Cam

A 10.24-GHz-wide digital spectrometer array system for LMT-FINER: system design and laboratory performance verification

Poster Session: Detectors I

The PolarKID project: polarization measurements with KIDs for the next generation of CMB telescopes

The Simons Observatory: design, fabrication, and characterization of low-frequency detectors

Development of the low-frequency telescope focal plane detector arrays for LiteBIRD

Dual polarization kinetic inductance detectors for large imaging cameras at millimeter wave bands

The characterisation of a PID feedback-controlled array of TES-bolometers in a far-infrared double-Fourier interferometry testbed

Poster Session: Multiplexing and Readout I

Development of RFSoC-based direct sampling highly multiplexed microwave SQUID readout for CMB and submillimeter surveys

On-board science data quality analysis using anomaly detection for ASTHROS

CCAT: multirate DSP for sub-mm astronomy: polyphase synthesis filter bank on FPGA for enhanced MKID readout

Development of LiteBIRD's cold readout sub-assembly

Johnson-noise calibration of a TES bolometer array using FDM readout with baseband feedback

Poster Session: CMD Instruments I

Technical feasibility of microwave absorbers for straylight mitigation in the LiteBIRD MHFT telescopes

HoverCal + PoloCalC: precise on-flight metrology performance results over CLASS telescope

Design and validation of a cold load for characterization of CMB-S4 detectors

The Simons Observatory: calibration and characterization of the first small-aperture telescope

Measuring the CMB spectral distortions with COSMO: the multimode antenna system

The Simons Observatory: deployment and current configuration of the observatory control system for SAT-MF1 and data access software systems

Replicating sky emission in labs for astronomers

Poster Session: Imagers and Polarimeters ROGer: Remote Observing from Greenland

Simulated radiation features of a C-band phased array feed located at the Sardinia Radio Telescope primary focus

Poster Session: New Instruments and Concepts

Concept design of the AMT front-end optics

LuSEE-Night power requirements and power generation strategy

Compact turnstile quad-ridge orthomode transducer with octave bandwidth for radio astronomy applications

Free space experimental characterization of a multilayer Fabry-Pérot resonator for DALI

Commissioning Kuntur: the LLAMA 690GHz receiver at JCMT

Development of an ultra-sensitive 210-micron array of KIDs for far-IR astronomy

A C-band dual-mode radio astronomy low-noise block downconverter designed for the 4-element radio interferometer of North-West University

Poster Session: Detectors II

A cryogenic facility to characterize detector-particle interactions

Spatial mapping of kilopixel kinetic inductance detector arrays for PRIMA

CCAT: nonlinear effects in 280 GHz aluminum kinetic inductance detectors

A review of the enduring performance and reliability of SCUBA-2 at the JCMT SNSPD development within the SPID / IQSENS project

Poster Session: Optics and Components I

Holographic field-retrieval method of near-field measurements of wide field of view millimeter-wave telescopes using reference phase shifting

Near-field reflection measurements of lightweight absorbers in the millimeter-wavelengths for space missions

Design and characterization of a 60-cm reflective half-wave plate for the CLASS 90 GHz band telescope

Design, fabrication, and applications of THz dielectric metamaterials

A low-loss silicon optical diplexer for millimeter and submillimeter radio astronomy

Reflectance measurements of mm-wave absorbers using frequency-domain continuous wave THz spectroscopy

Poster Session: CMD Instruments II

Development status of the cryogenic holder mechanism for LiteBIRD LFT PMU

Vector beam mapping at millimeter wavelengths using a robot arm

Anti-reflection coating of laser-ablated sub-wavelength structure for millimeter-wave alumina filters

Capacitive sensors for the polarization modulator unit of the mid- and high-frequency telescopes of LiteBIRD space mission

Design and performance test of a modular readout electronic for the kinetic inductance detectors for the COSMO experiment based on commercial components

CCAT: Prime-Cam optics overview and status update

The Simons Observatory: studies of detector yield and readout noise from the first large-scale deployment of microwave multiplexing at the large aperture telescope

Calibration of CMB Telescopes with PROTOCALC

The European low-frequency survey on the Simons Array

Poster Session: Coherent Receiver

A customizable, five-stage, intermediate frequency, low-noise amplifier and readout chain for the Astrophysics Stratospheric Telescope for High-spectral Resolution Observations at Submillimeter-wavelengths (ASTHROS)

Cryogenic high-linearity and dynamic range C-band low-noise amplifier for uMUX TES and CMB readout systems

Development of 230 GHz finline SIS mixers for next-generation large array receivers and HARP instrument upgrade

Development of 86 GHz low-noise wideband receiver

VLBI instrument for Millimetron Space Observatory

Broadband tuneable travelling wave parametric multiplier based on high-gap superconducting thin film

The ALMA2030 wideband sensitivity upgrade

Poster Session: Multiplexing and Readout II

Study of a Microwave Kinetic Inductance Detector (MKID) readout system based on FPGAs and SoCs.

CCAT: detector noise limited performance of the RFSoC-based readout electronics for mm/sub-mm/far-IR KIDs

CMB-S4 SiGe ASIC-based daughter board for low-temperature detectors front-end analog readout

Poster Session: Spectrometers I TIME: the Tomographic Ionized-carbon Mapping Experiment: an update on design, characterization, and data from the 2022 commissioning observations

CCAT: characterizing the Fabry-Pérot interferometer mirrors and mount for the epoch of reionization spectrometer

Superfluid-tight cryogenic receiver with continuous sub-kelvin cooling for EXCLAIM

PULsar SKArab-based system for Radio astronomy (PULSKAR)

Development and characterization of the flight model spectrometer onboard LuSEE-Night

Poster Session: Optics and Components II

Development of a wideband receiver for dual-band and dual-polarization observations in 230 and 345 GHz bands

Multilayer antireflection coats using ePTFE membrane for mm-wavelength plastic optics

3D printed alumina as a millimeter-wave optical element

Thermal and mechanical study of a parametrised cryostat model for optical characterisation of upcoming CMB experiments

Poster Session: CMB Instruments III

The Precursor Small Aperture Telescope (PreSAT) CMB polarimeter

The Simons Observatory: alarms and detector quality monitoring

Systematic effects induced by half-wave plate differential optical load and TES nonlinearity for LiteBIRD

The Simons Observatory: dark characterization of the large aperture telescope

The map-making and data filtering pipeline for the MISTRAL receiver

Design, mechanical, and thermal analysis for medium- and high-frequency telescopes of LiteBIRD LiteBIRD MHFT W-band RF breadboard modeling and characterisation

Design optimization of anechoic SKYLOAD dedicated for LiteBIRD MHFT on-ground testing

Multichroic pixels using double flare angle bowtie antenna coupled KIDs for CMB observation.

Notes:

Description based on publisher supplied metadata and other sources.

ISBN:

1-5106-7528-0