Piping handbook / [edited by] Mohinder L. Nayyar.

Format:

Book

Contributor:

Nayyar, Mohinder L.

Series:

McGraw-Hill's AccessEngineering

Language:

English

Subjects (All):

Pipe.

Pipe fitting.

Piping.

Pipe--Materials.

Piping--Standards.

Pipe joints.

Joints (Engineering).

Pipe, Concrete.

Valves.

Piping--Design and construction.

Strains and stresses.

Pipe supports.

Insulation (Heat).

Pipe--Fluid dynamics.

Water-pipes--Linings.

Water-pipes.

Water-pipes--Corrosion.

Double wall piping.

Water-pipes--Testing.

Water leakage.

Pipe--Testing.

Fire protection engineering.

Petroleum pipelines.

Gas pipelines.

Pipelines.

Steam.

Low temperature engineering.

Refrigeration and refrigerating machinery.

Hazardous substances.

Slurry pipelines.

Water-supply engineering.

Sewer-pipe.

Storm sewers.

Plumbing--Equipment and supplies.

Plumbing.

Ash disposal.

Compressed air.

Vacuum technology.

Gas-pipes.

Thermoplastics.

Pipe, Plastic.

Glass fibers.

Genre:

Electronic books.

Internet resources.

Physical Description:

1 online resource (1 electronic text) : illustrations.

Edition:

7th ed.

Place of Publication:

New York : McGraw-Hill, [2000]

Contents:

http://www.loc.gov/catdir/toc/mh021/00265340.html

Pt. A. Piping fundamentals

part B. Generic design considerations

part C. Piping systems

part D. Nonmetallic piping.

A. HONORS LIST

CONTRIBUTORS

REVIEWERS

TECHNICAL AND ADMINISTRATIVE SUPPORT

B. PREFACE

ABOUT THE EDITOR IN CHIEF

C. HOW TO USE THIS HANDBOOK

A. Part A: PIPING FUNDAMENTALS

A1. INTRODUCTION TO PIPING

INTRODUCTION

PIPING

PIPING CLASSIFICATION

OTHER PIPE RATINGS

GENERAL DEFINITIONS

FORCES, MOMENTS, AND EQUILIBRIUM

WORK, POWER, AND ENERGY

HEAT AND TEMPERATURE

LENGTHS, AREAS, SURFACES, AND VOLUMES

ACRONYMS AND ABBREVIATIONS

USEFUL TABLES

UNITS AND CONVERSION TABLES

REFERENCES

A2. PIPING COMPONENTS

PIPE AND TUBE PRODUCTS

TRAPS

STRAINERS

EXPANSION JOINTS

THREADED JOINTS

WELDED AND BRAZED JOINTS

JOINING DUCTILE OR CAST-IRON PIPE

CONCRETE, CEMENT, AND CEMENT-LINED PIPE

A3. PIPING MATERIALS

MATERIAL PROPERTIES OF PIPING MATERIALS

METALLIC MATERIALS

PHYSICAL METALLURGY OF STEEL

ALLOYING OF STEEL

CLASSIFICATION OF STEELS

STEEL HEAT-TREATING PRACTICES

DEGRADATION OF MATERIALS IN SERVICE

MATERIAL SPECIFICATIONS

A4. PIPING CODES AND STANDARDS

AMERICAN SOCIETY OF MECHANICAL ENGINEERS

ASME BOILER AND PRESSURE VESSEL CODE

ASME SECTION I: POWER BOILERS

ASME SECTION II: MATERIALS

ASME SECTION III: NUCLEAR POWER PLANT COMPONENTS

ASME SECTION V: NONDESTRUCTIVE EXAMINATION

ASME SECTION VIII: PRESSURE VESSELS

ASME SECTION IX: WELDING AND BRAZING QUALIFICATIONS

ASME SECTION XI: RULES FOR IN-SERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS

ASME B31: CODE FOR PRESSURE PIPING

ASME B31.1: POWER PIPING CODE

USAS B31.2: FUEL GAS PIPING

ASME B31.3: PROCESS PIPING

ASME B31.4: LIQUID TRANSPORTATION SYSTEMS FOR HYDROCARBONS, LIQUID PETROLEUM GAS, ANHYDROUS AMMONIA, AND ALCOHOLS

ASME B31.5: REFRIGERATION PIPING

ASME B31.8: GAS TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS

ASME B31.9: BUILDING SERVICES PIPING

ANSI/ASME B31.11: SLURRY TRANSPORTATION PIPING SYSTEMS

ASME PERFORMANCE TEST CODES

AMERICAN SOCIETY FOR TESTING AND MATERIALS

AMERICAN GAS ASSOCIATION

AMERICAN PETROLEUM INSTITUTE

AMERICAN WATER WORKS ASSOCIATION

AMERICAN WELDING SOCIETY

AIR-CONDITIONING AND REFRIGERATION INSTITUTE

AMERICAN SOCIETY OF HEATING REFRIGERATING AND AIR-CONDITIONING ENGINEERS

AMERICAN SOCIETY OF SANITARY ENGINEERS

AMERICAN SOCIETY OF CIVIL ENGINEERS

AMERICAN SOCIETY FOR NONDESTRUCTIVE TESTING

AMERICAN IRON AND STEEL INSTITUTE

AMERICAN NUCLEAR SOCIETY

BUILDING OFFICIALS CONFERENCE OF AMERICA

DUCTILE IRON PIPE RESEARCH ASSOCIATION

EXPANSION JOINT MANUFACTURERS ASSOCIATION

FLUID CONTROLS INSTITUTE

FACTORY MUTUAL ENGINEERING and RESEARCH CORPORATION

FLUID SEALING ASSOCIATION

HEAT EXCHANGE INSTITUTE

HYDRAULIC INSTITUTE

INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS

INSTRUMENT SOCIETY OF AMERICA.

MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS INDUSTRY

NATIONAL FIRE PROTECTION ASSOCIATION

PIPE FABRICATION INSTITUTE

PLASTICS PIPE INSTITUTE

STEEL STRUCTURES PAINTING COUNCIL

TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION

UNDERWRITERS LABORATORIES

FOREIGN CODES AND STANDARDS

BRITISH STANDARDS AND SPECIFICATIONS

DIN STANDARDS AND SPECIFICATIONS

JAPANESE STANDARDS AND SPECIFICATIONS

ISO STANDARDS AND SPECIFICATIONS

A5. MANUFACTURING OF METALLIC PIPE

DEVELOPMENT OF COMMERCIAL PIPE-MAKING

FERROUS PIPE-MAKING PROCESSES

NONFERROUS PIPE-MAKING PROCESSES

COMMERCIAL PIPE AND TUBE SIZES

TUBULAR PRODUCT CLASSIFICATION

SPECIALTY TUBULAR PRODUCTS

ENGINEERING SELECTION OF PIPE MANUFACTURING METHODS

A6. FABRICATION AND INSTALLATION OF PIPING SYSTEMS

FABRICATION

INSTALLATION

A7. BOLTED JOINTS

COST OF A LEAK

THE PROCESS OF JOINT INTEGRITY

FLANGE JOINT COMPONENTS

FUNCTION OF GASKETS

FUNCTION OF BOLTS

BEHAVIOR OF THE FLANGED JOINT SYSTEM

GASKET SELECTION

BOLT SELECTION

FLANGE STRESS ANALYSIS

ASSEMBLY CONDITIONS

BOLT LOAD MONITORING

MANAGING FLANGE JOINT INTEGRITY

A8. PRESTRESSED CONCRETE CYLINDER PIPE (PCCP) AND FITTINGS

DESCRIPTION

DESIGN

MANUFACTURE

JOINTS

BIBLIOGRAPHY

A9. GROOVED AND PRESSFIT PIPING SYSTEMS

PRESSFIT?

GROOVED MECHANICAL PIPE JOINTS

A10. PART 1 SELECTION AND APPLICATION OF VALVES

VALVE TERMINOLOGY

REFERENCE CODES AND STANDARDS

CLASSIFICATION OF VALVES

MAJOR VALVE PARTS

MATERIALS

VALVE CATEGORIES

VALVE TYPES

PRESSURE-RELIEF DEVICES

ACTUATORS

SELECTION AND APPLICATION GUIDELINES

A10. PART 2 SELECTION AND APPLICATION OF CONTROL VALVES

DEFINITION OF CONTROL VALVES

HOW TO SPECIFY CONTROL VALVES

FOR LIQUID SERVICE

FOR GAS AND STEAM SERVICE

B. Part B: GENERIC DESIGN CONSIDERATIONS

B1. HIERARCHY OF DESIGN DOCUMENTS

PROJECT EVOLUTION

FIRST STAGE

SECOND STAGE

THIRD STAGE

B2. DESIGN BASES

DEFINITION OF THE TERM DESIGN BASES

USE OF CODES AND STANDARDS IN PIPING SYSTEM DESIGN

PIPING JOINTS

LOADING CONDITIONS

ENVIRONMENTAL FACTORS

MATERIALS-RELATED CONSIDERATIONS

THERMAL INSULATION

SIZING OF A PIPING SYSTEM

B3. PIPING LAYOUT

CODES AND STANDARDS

PIPING LAYOUT CONSIDERATIONS

SPECIFIC SYSTEM CONSIDERATIONS

APPLICATION OF COMPUTER-AIDED DESIGN TO PIPING LAYOUT

FURTHER READING

B4. STRESS ANALYSIS OF PIPING SYSTEMS

FAILURE THEORIES, STRESS CATEGORIES, STRESS LIMITS, AND FATIGUE

CLASSIFICATION OF LOADS, SERVICE LIMITS, AND CODE REQUIREMENTS

STRESS INTENSIFICATION FACTORS (SIF) FOR NONSTANDARD FITTINGS

LOCAL STRESSES

ANALYSIS OF INTEGRAL WELDED ATTACHMENTS (IWA)

TYPES OF PIPE LOADING CONDITIONS

METHODS OF ANALYSIS

PROCEDURES FOR THE DESIGN OF RESTRAINED UNDERGROUND PIPING

B5. PIPING SUPPORTS

DETERMINATION OF SUPPORT LOCATIONS

DETERMINATION OF LOADS AND MOVEMENTS

SELECTION OF PIPE-SUPPORTING DEVICES.

SUPPORT REQUIREMENTS FOR SPECIFIC PIPING MATERIALS

DESIGN DETAIL CONSIDERATIONS

OTHER PIPE SUPPORT CONSIDERATIONS

B6. HEAT-TRACING OF PIPING SYSTEMS

TYPES OF HEAT-TRACING SYSTEMS

FLUID HEAT-TRACING

ELECTRIC RESISTANCE HEAT-TRACING

SKIN EFFECT TRACING

IMPEDANCE HEAT-TRACING

INDUCTION HEATING

SELECTION CRITERIA FOR TRACING SYSTEMS

AREA CLASSIFICATION

ENVIRONMENTAL CONSIDERATIONS

HEATER RELIABILITY AND CONSEQUENCE OF FAILURE

TRACING OPTIONS FOR DIFFERENT TEMPERATURE RANGES

AVAILABILITY OF STEAM AND ELECTRICITY

INSTALLED AND OPERATING COSTS

COMPUTER SELECTION PROGRAMS

STEAM OR ELECTRIC TRACING: DESIGN CONSIDERATIONS

ELECTRIC SYSTEM DESIGN

B7. THERMAL INSULATION OF PIPING

FUNDAMENTALS OF HEAT TRANSFER

DESIGN PARAMETERS

DESIGN CONDITIONS

SERVICE CONSIDERATIONS

ACCESSORY MATERIALS

B8. FLOW OF FLUIDS

THEORETICAL BACKGROUND

STEADY SINGLE-PHASE INCOMPRESSIBLE FLOW IN PIPING

STEADY SINGLE-PHASE COMPRESSIBLE FLOW IN PIPING

SINGLE-PHASE FLOW IN NOZZLES, VENTURI TUBES, AND ORIFICES

STEADY TWO-PHASE FLOW

TRANSIENT FLOW ANALYSIS

B9. CEMENT MORTAR AND CONCRETE LININGS FOR PIPE

CONCRETE PRESSURE PIPE AND FITTINGS

DUCTILE IRON PIPE AND FITTINGS

STEEL PIPE AND FITTINGS

MISCELLANEOUS CONSIDERATIONS

B10. FUSION-BONDED EPOXY INTERNAL LININGS AND EXTERNAL COATINGS FOR PIPELINE CORROSION PROTECTION

BACKGROUND, HISTORY, AND ADVANTAGES OF FBE LININGS AND COATINGS

TERMINOLOGY

TYPES OF ORGANIC PIPELINE PROTECTION LININGS AND COATINGS

FBE CHEMISTRY

CHOOSING A FUSION-BONDED EPOXY COATING OR LINING

FBE APPLICATION PROCESSES

QUALITY ASSURANCE

JOINT SYSTEMS COATINGS AND LININGS

HANDLING, SHIPPING, STORAGE, INSTALLATION, AND REPAIRS OF FBE LINED AND COATED PIPE AND FITTINGS

REFERENCE CODES, STANDARDS, SPECIFICATIONS, AND REGULATIONS

B11. RUBBER-LINED PIPING SYSTEMS

PIPE FABRICATION REQUIREMENTS

LINING GUIDELINES

PROTECTING RUBBER-LINED PIPE

ASSEMBLY, TESTING, INSPECTIONS, AND MAINTENANCE

LINING SELECTION CONSIDERATIONS

SUMMARY

GLOSSARY

B12. PLASTIC-LINED PIPING FOR CORROSION RESISTANCE

METHODS OF MANUFACTURE

LINER MATERIALS

DESIGN CONSIDERATIONS

INSTALLATION AND MAINTENANCE PRACTICES

FLANGE REDUCTION TECHNIQUES

APPLICABLE INDUSTRY STANDARDS

PROJECT SPECIFICATIONS

INSPECTION AND SERVICE LIFE ANALYSIS

AUXILIARY PRODUCTS

B13. DOUBLE CONTAINMENT PIPING SYSTEM DESIGN

DOUBLE CONTAINMENT PIPING COMPONENTS

LAYOUT OF DOUBLE CONTAINMENT PIPING SYSTEMS

LEAK DETECTION METHODS AND REQUIREMENTS

B14. PRESSURE AND LEAK TESTING

PIPING CODES

LEAK-TESTING METHODS

SELECTION OF A TEST METHOD AND FLUID TEST MEDIUM

PRESSURE TESTING PROCEDURES

HYDROSTATIC TEST PLUGS

HYDROSTATIC TEST PLUGS SUITED TO TESTING A SINGLE WELD

FREEZE PLUGS

C. Part C: PIPING SYSTEMS

C1. WATER SYSTEMS PIPING

HYDRAULIC AND ENERGY GRADE LINES

REFERENCE DOCUMENTS

DESIGN BASIS CONSIDERATIONS

C2. FIRE PROTECTION SYSTEMS PIPING

C3. STEAM SYSTEMS PIPING

EXPERIENCE FEEDBACK

REPAIRS, REPLACEMENTS, AND MODIFICATIONS

C4. BUILDING SERVICES PIPING

CONSTRUCTION CODES

BASIC SYSTEMS.

PIPE DESIGN

PIPE MATERIALS

PIPE FITTINGS AND JOINTS

MATERIAL SELECTION

WELDING

HANGERS AND SUPPORTS

EXPANSION AND FLEXIBILITY

TESTING

PROBLEMS AND SOLUTIONS

C5. OIL PIPELINE SYSTEMS

LIQUID-PETROLEUM PIPELINE SYSTEMS

HYDRAULIC DESIGN

MECHANICAL DESIGN

OPERATIONS AND MAINTENANCE DESIGN

SYSTEM COST ANALYSIS22

SPECIAL OIL PIPELINE DESIGN TOPICS

C6. GAS SYSTEMS PIPING

PIPE AND FITTINGS

COMPRESSOR STATIONS

OTHER FACILITIES

CORROSION PROTECTION

INSPECTION AND TESTING

OPERATION AND MAINTENANCE

DECOMMISSIONING/ABANDONMENT

C7. PROCESS PIPING SYSTEMS

DESIGN LOADING CONSIDERATIONS

PRESSURE DESIGN OF PIPING COMPONENTS

SELECTION AND LIMITATIONS OF PIPING COMPONENTS

GENERAL PROCESS PIPING SYSTEM CONSIDERATIONS

SPECIAL DESIGN PIPING SYSTEMS

SYSTEM LAYOUT CONSIDERATIONS

CASE HISTORIES: CHALLENGES/SOLUTIONS

C8. CRYOGENIC PIPING SYSTEMS

ECONOMIC PARAMETERS OF CRYOGENIC FLUID DISTRIBUTION SYSTEMS

PROPERTIES OF CRYOGENIC FLUIDS

MATERIALS USED IN CRYOGENIC PIPING SYSTEMS

FERROUS MATERIALS

NONFERROUS ALLOYS

NONMETALLIC MATERIALS

JOINING

ENVIRONMENTAL AND SAFETY CONCERNS

PIPING SYSTEM DESIGN-FLUIDS

PIPE SIZING CRITERIA

TWO-PHASE FLOW

OXYGEN GAS PIPING

PIPING ARRANGEMENT

PIPING SYSTEM DESIGN-MECHANICAL

APPLICABLE CODES AND MATERIALS

ECONOMIC PIPE SIZING

PIPING COMPONENTS

FLEXIBILITY ANALYSIS AND SUPPORTS FOR CYROGENIC PIPING SYSTEMS

INSTALLATION OF PIPING COMPONENTS

INSULATION SYSTEMS

CLEANING

VENTS

COLD BOX PIPING

DESIGN REQUIREMENTS FOR COLD BOX PIPING

DESIGN REQUIREMENTS FOR SPECIAL SITUATIONS

LIQUID STORAGE AND CONVERSION SYSTEMS

LOW-PRESSURE BULK CONVERSION SYSTEMS

HIGH-PRESSURE BULK CONVERSION SYSTEMS

BULK LIQUID DELIVERY SYSTEMS

MOBILE EQUIPMENT SYSTEM

INTERNAL PIPING

EXTERNAL PIPING

ULTRA-HIGH-PURITY PIPING

GENERAL GAS SUPPLY SYSTEM DESCRIPTION

SYSTEM DESIGN AND FABRICATION REQUIREMENTS

CHECKOUTAND START-UP

C9. REFRIGERATION SYSTEMS PIPING

REFRIGERATION CYCLES

ALTERNATIVE REFRIGERANTS

PRESSURE DROP IN REFRIGERATION PIPING

MECHANICAL PIPING DESIGN

C10. HAZARDOUS PIPING SYSTEMS

TERMS USED IN THIS CHAPTER

CODES, STANDARDS, AND REGULATIONS

IDENTIFICATION OF HAZARDOUS PIPING.

QUALITY ASSURANCE AND QUALITY CONTROL

PRESSURE DESIGN

JOINT DESIGN

EXTERNAL LOADS DESIGN

OPERATING MANUAL PREPARATION

FABRICATION AND ERECTION

EXAMINATION, INSPECTION, AND TESTING

MODIFICATIONS AND REPAIRS

C11. SLURRY AND SLUDGE PIPING

DEFINITION AND BACKGROUND

SLURRY FLOW BEHAVIOR

IN-PLANT SYSTEMS

LONG-DISTANCE PIPELINES

SLURRY CHARACTERISTICS

SLURRY HYDRAULICS

DESIGN FEATURES

C12. WASTEWATER AND STORMWATER PIPING SYSTEMS

DEFINITIONS

UNITS AND ABBREVIATIONS

QUANTITY OF FLOW

QUANTITY OF STORMWATER FLOWS

HYDRAULICS OF SEWERS

UNIFORM-FLOW FORMULAS AND CALCULATIONS

ASPECTS OF NONUNIFORM FLOW

DESIGN ASPECTS OF SEWERS

DESIGN EXAMPLES

SEWER PIPE

APPURTENANCES AND SPECIAL STRUCTURES

DISPOSAL OF WASTEWATER AND STORMWATER

C13. PLUMBING PIPING SYSTEMS

FIXTURE UNITS

PLUMBING FIXTURES

EQUIVALENT LENGTH OF PIPING

PIPING MATERIALS: GENERAL

MISCELLANEOUS FITTINGS

JOINTS FOR PLASTIC PIPE

SANITARY DRAINAGE SYSTEM PIPING

SANITARY VENT SYSTEM PIPING

INTERIOR STORMWATER DRAINAGE SYSTEM PIPING

POTABLE WATER SUPPLY SYSTEMS AND PIPING

SERVICE HOT WATER SYSTEM

C14. ASH HANDLING PIPING SYSTEMS

INTRODUCTION TO ASH HANDLING SYSTEMS

TYPES OF SYSTEMS

DESIGN CRITERIA

SYSTEM-SPECIFIC CONSIDERATIONS

PIPING COMPONENTS AND MATERIALS FOR PIPE, FITTINGS, AND JOINTS

PIPE

FITTINGS

VALVES

COUPLINGS

PIPE SUPPORTS

INSTRUMENTATION

FABRICATION AND INSTALLATION CONSIDERATIONS

EXAMINATION AND TESTING OF ASH HANDLING PIPING SYSTEMS

EXPERIENCE FEEDBACK-PROBLEMS AND SOLUTIONS

C15. COMPRESSED AIR PIPING SYSTEMS

GENERAL

DEFINITIONS AND PRESSURE MEASUREMENTS

PHYSICAL PROPERTIES OF AIR

WATER VAPOR IN AIR

IMPURITIES AND CONTAMINATION

AIR COMPRESSORS

AFTER COOLERS

COMPRESSED AIR RECEIVERS

COMPRESSED AIR DRYERS

FILTERS AND SEPARATORS

CONTAMINATION REMOVAL

SILENCERS

COMPRESSOR REGULATION

STARTING UNLOADER

PIPING NETWORK DESIGN

DISCUSSION OF ITEMS IN THE DESIGN SEQUENCE

PIPING SYSTEM DESIGN

INSTRUMENT AIR

C16. COMPRESSED GASES AND VACUUM SYSTEMS FOR LABORATORIES

COMPRESSED GAS FUNDAMENTALS

VACUUM FUNDAMENTALS

CLASSIFICATION OF SPECIALTY COMPRESSED GASES

GRADES OF SPECIALTY GASES

STORAGE AND GENERATION OF GASES

GAS DISTRIBUTION SYSTEM COMPONENTS

DISTRIBUTION NETWORK

LABORATORY VACUUM SYSTEM DESCRIPTION

LABORATORY VACUUM SYSTEM CODES AND STANDARDS

LABORATORY VACUUM SYSTEM COMPONENTS

PIPING DISTRIBUTION NETWORK

PIPING DISTRIBUTION NETWORK SIZING CRITERIA

PIPING DISTRIBUTION NETWORK SIZING

C17. FUEL GAS DISTRIBUTION PIPING SYSTEMS

FUEL GAS DESCRIPTION

SYSTEM OPERATING PRESSURES

NATURAL GAS

MAJOR NATURAL GAS SYSTEM COMPONENTS

SITE DISTRIBUTION

SITE BUILDING SERVICE-SIZING PROCEDURE

BUILDING INTERIOR PIPE-SIZING PROCEDURE

PIPE AND SYSTEM MATERIALS

SYSTEM TESTING AND PURGING

LIQUEFIED PETROLEUM GAS (LPG)

LPG STORAGE TANKS

LPG EQUIPMENT ON THE SITE

LPG SYSTEM DESIGN

LPG SYSTEM TESTING AND PURGING.

D. Part D: NONMETALLIC PIPING

D1. THERMOPLASTICS PIPING

SCOPE

THERMOPLASTIC PIPING MATERIALS

JOINING METHODS

DIMENSIONING SYSTEMS

PHYSICAL AND MECHANICAL PROPERTIES

CHEMICAL RESISTANCE

DESIGN AND INSTALLATION

COMMON DESIGN AND INSTALLATION CONSIDERATIONS

CONSIDERATIONS FOR ABOVEGROUND USES

CONSIDERATIONS FOR BELOWGROUND USES

SOURCES OFADDITIONAL INFORMATION

D2. FIBERGLASS PIPING SYSTEMS

TYPICAL APPLICATIONS

STANDARDS

RESINS

MANUFACTURING PROCESSES

JOINING SYSTEMS

RESISTANT PROPERTIES

PHYSICAL PROPERTIES

BENEFITS AND LIMITATIONS OF FIBERGLASS PIPING SYSTEMS

PRESSURE RATINGS

ABOVEGROUND DESIGN

BELOWGROUND DESIGN

CONNECTION TO OTHER EQUIPMENT AND PIPING MATERIAL

INSULATION AND HEAT TRACING

PAINTING FIBERGLASS PIPING

HYDROSTATIC TESTING

AIR TESTING

E. Part E: APPENDIXES

E1. CONVERSION TABLES

E2. PIPE PROPERTIES

E3. TUBE PROPERTIES

E3M. TUBE PROPERTIES (METRIC) FOR COPPER TUBE

E4. FRICTION LOSS FOR WATER IN FEET PER 100 FT OF PIPE

E4M. FRICTION LOSS FOR WATER IN METERS PER 100 METERS OF PIPE

E5. PIPE, TUBE, AND FITTING MATERIAL SPECIFICATIONS ACCEPTABLE FOR ASME B31, PRESSURE PIPING CODE, AND ASME BOILER AND PRESSURE VESSEL CODE

E6. INTERNATIONAL PIPING MATERIAL SPECIFICATIONS

E7. MISCELLANEOUS FLUIDS AND THEIR PROPERTIES

E8. MISCELLANEOUS MATERIALS AND THEIR PROPERTIES

E9. PIPING-RELATED COMPUTER PROGRAMS AND THEIR CAPABILITIES

E10. INTERNATIONAL STANDARDS AND SPECIFICATIONS.

Notes:

Print version c2000.

Includes bibliographical references.

Description based on cover image and table of contents, viewed on April 28, 2007.

ISBN:

9780070471061

Access Restriction:

Restricted for use by site license.