Characterization of Minerals, Metals, and Materials 2017 / edited by Shadia Ikhmayies, Bowen Li, John S. Carpenter, JIan Li, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Mingming Zhang, Zhiwei Peng, Juan P. Escobedo-Diaz, Chenguang Bai, Yunus Eren Kalay, Ramasis Goswami, Jeongguk Kim.

Format:

Book

Contributor:

Ikhmayies, Shadia., Editor.

Li, Bowen., Editor.

Carpenter, John S., Editor.

Li, Jian, Editor.

Hwang, Jiann-Yang, Editor.

Monteiro, Sergio Neves, Editor.

Firrao, Donato, Editor.

Zhang, Mingming (Metallurgist), Editor.

Peng, Zhiwei, Editor.

Escobedo-Diaz, Juan P., Editor.

Bai, Chen-Guang, Editor.

Kalay, Yunus Eren., Editor.

Goswami, Ramasis., Editor.

Kim, Jeongguk., Editor.

Series:

The Minerals, Metals & Materials Series, 2367-1696

Language:

English

Subjects (All):

Materials--Analysis.

Materials.

Building materials.

Characterization and Analytical Technique.

Structural Materials.

Materials Engineering.

Local Subjects:

Characterization and Analytical Technique.

Structural Materials.

Materials Engineering.

Physical Description:

1 online resource (XXIX, 872 p. 480 illus.)

Edition:

1st ed. 2017.

Place of Publication:

Cham : Springer International Publishing : Imprint: Springer, 2017.

Summary:

This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition, topics as varied as structural steels to electronic materials to plant-based composites are explored. The latest research presented in this wide area make this book both timely and relevant to the materials science field as a whole. The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials. Topics covered include ferrous materials, non-ferrous materials, minerals,ceramics, clays, soft materials, method development, processing, corrosion, welding, solidification, composites, extraction, powders, nanomaterials, advanced materials, and several others.

Contents:

Part 1: Soft Materials

Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites

Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique

Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers

Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers

The dimensional characterization of jute fabric strips for reinforcement in composite polymeric

Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites

Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide

Radiation Effects on Crosslinking of Butyl Rubber Compounds

Part 2: Clays and Ceramics

Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer

Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors

Adsorption of lead from aqueous solutions to bentonite and composite

Part 3: Electronic, Magnetic, Environmental, and Advanced Materials

Characterization Of Low-Zinc Electric Arc Furnace Dust

GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED

STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT

Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method

Part 4: Nano Materials

Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors

Enhanced physical properties of thin film nanocomposites

A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip

Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites

Part 5: Alloys

Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101

MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V

Part 6: Powders and Foams

SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE

Application of AFM in Morphology Determination of Powder Material

Effects of Thermal Processing on Closed-Cell Aluminium Foams

Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact

Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact

Part 7: Minerals

INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK

Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation

Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals

TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM

Synthesis and Characterization of Sodalite and Cancrinita from Kaolin

Part 8: Ferrous Metals

Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter

Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis

Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres

Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors

Important Factors to Consider in FIB Milling of Crystalline Materials

Part 9: Material Processing and Corrosion

Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media

Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile

Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion

Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique

Part 10: Method Development

Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide

Part 11: Composites

High thermal conducting composites using percolation theory

SORPTION CHARACTERISTICS OF LOW DENSITY POLYETHYLENE/KOLA NUT COMPOSITE

Residual Stress Analysis within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction

Tensile Behavior of Epoxy Matrix Composites Reinforced With Pure Ramie Fabric

Hemp Fiber Density Using the Pycnometer Technique

Preparation and Characterization of Clay Exfoliation and Vegetal fibre on Properties of Recycled Low Density Polyethylene (rLDPE)

Part 12: Ferrous Metals

Estimation of Dislocation Density in Metals from Microhardness Test

Part 13: Welding and Solidification

Interfacial strength characterization in a high-modulus low-density steel-based Fe-TiB2 composite

Part 14: Materials Extractions

Leaching of Copper-Cobalt Tailings from the Democratic Republic of Congo

OPTIMUM OPERATING CONDITIONS FOR EXTRACTION OF LIGNIN PRECURSORS FROM PALM FRUIT BUNCH

SELECTION ON THE PROCESS FOR ENRICHING GOLD FROM REFRACTORY GOLD ORES BY SMELTING

SELECTION ON THE PROCESS FOR REMOVING AND RECOVERING ANTIMONY FROM ANTIMONIAL REFRACTORY GOLD ORES

Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings

CHARACTERIZATION OF SPENT PRINTED CIRCUIT BOARDS FROM COMPUTERS

Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte

Part 15: Poster Session

Addition of Cellulose Nanofibers in Reactive Powder Concrete

ADVANCED ION COLUMN SOLUTION FOR LOW ION DAMAGE CHARACTERIZATION AND ULTRA-FINE PROCESS

Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise

Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal

Characteristics of stamp charging coke and top charging coke

Characterization and leaching proposal of Ag ( I) from a Zn concentrate

Characterization and Mechanical Properties of Additively Manufactured Stainless Steel 316L

CHARACTERIZATION OF MERCURY JAROSITE

Characterization of steel production dust and their use in structural ceramics

CHARPY TOUGHNESS BEHAVIOR OF JUTE FABRIC REINFORCED POLYESTER MATRIX COMPOSITES

Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo

Contribution to the ß relaxation study of the HDPE, LDPE and LLDPE

Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES

Effects of wet grinding on the structure and granularity of biological origin aragonite and its polymorphic transformation into calcite

EVALUATION OF BALLISTIC ARMOR BEHAVIOR WITH EPOXY COMPOSITE REINFORCED WITH MALVA FIBERS

EVALUATION OF THE POZZOLANIC ACTIVITY OF RESIDUE FROM THE PAPER INDUSTRY

EVALUATION OF THE PROPERTIES OF THE ADHESIVE MORTAR IN THE FRESH STATE WITH ADDITION OF GLASS WASTE

Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on The Behavior of Clay Masonry

Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method

Polymer Blend based on recycled polyethylene and ethylene vinyl acetate copolymers reinforced with natural fibers from agricultural wastes

Preliminary study of the effect of stirring rate, temperature and oxygen pressure on the leach rate of copper powder, generated by grinding of printed circuit boards of computer

Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles

Production of concrete interlocking blocks with partial replacement of sand in bulk by waste glass machined

Reactive Powder Concrete Production with the Addition of Granite Processing Waste

Research on the reason of the different type of chloride forming in the process of blast furnace ironmaking

Stress and Deformation Analysis of Hot Blast Stove Piping System

Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell

STUDY OF CALCINED MIXTURES FROM INDUSTRIAL RESIDUES FOR PRODUCTION OF AGGLOMERATES.-STUDY OF SYNERGISTIC EFFECT OF LIGHT STABILIZER ADDITIVE, CONVENTIONAL AND NANOPARTICLES, APPLIED TO POLYETHYLENE FILMS SUBMITTED TO ULTRAVIOLET RADIATION

Study of the effect of surface liquid flow during column flotation of mining tailing of the Dos Carlos dam

STUDY ON BENDING TEST ON CONCRETE STRUCTURAL USE CRUMB RUBBER AS SUBSTITUTE IN FINE AGGREGATE

Synthesis and structural characterization of BaTiO3 doped with Gd3+

Texture analysis and anisotropic properties of a rolled CuZn36 brass alloy

The influence of titanium content on the sinter ore phase structure and the crack

The use of Network Simplex method for planning the incorporation of recycled paper mill sludge in manufacturing of ceramic bodies

USE OF ALKALINE SOLID WASTES FROM KRAFT PULP AND PAPER MILLS, DREGS AND GRITS IN CEMENT PRODUCTION

Wood-to-concrete joints using steel connectors: experimental evaluation.

Notes:

Includes bibliographical references and indexes.

ISBN:

3-319-51382-6