8th International Symposium on High-Temperature Metallurgical Processing / edited by Jiann-Yang Hwang, Tao Jiang, Mark William Kennedy, Onuralp Yücel, P. Chris Pistorius, Varadarajan Seshadri, Baojun Zhao, Dean Gregurek, Ender Keskinkilic.

Format:

Book

Conference/Event

Contributor:

Hwang, Jiann-Yang, Editor.

Jiang, Tao, Editor.

Kennedy, Mark William., Editor.

Yücel, Onuralp, Editor.

Pistorius, P. Chris, Editor.

Seshadri, Varadarajan., Editor.

Zhao, Baojun, Editor.

Gregurek, Dean., Editor.

Keskinkilic, Ender., Editor.

Conference Name:

International Symposium on High-Temperature Metallurgical Processing (8th : 2017 : San Diego, Calif.)

Series:

The Minerals, Metals & Materials Series, 2367-1696

Language:

English

Subjects (All):

Materials--Analysis.

Materials.

Metals.

Characterization and Analytical Technique.

Metals and Alloys.

Materials Engineering.

Local Subjects:

Characterization and Analytical Technique.

Metals and Alloys.

Materials Engineering.

Physical Description:

1 online resource (XXII, 818 p. 421 illus.)

Edition:

1st ed. 2017.

Place of Publication:

Cham : Springer International Publishing : Imprint: Springer, 2017.

Summary:

This collection features contributions covering the advances and developments of new high-temperature metallurgical technologies and their applications to the areas of: processing of minerals; extraction of metals; preparation of metallic, refractory, and ceramic materials; treatment and recycling of slag and wastes; conservation of energy; and environmental protection. The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world by providing them with comprehensive coverage of a wide variety of topics.

Contents:

Part 1: Energy Efficient Clean Metallurgical Technology

Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work

Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture

Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection

Microwave-intensified Reduction of Biochar-containing Briquettes

Refractory Challenges in Lead Recycling Furnaces

Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix

Part 2: Simulation of High Temperature Process

A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor

A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement

Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process

Analysis of Jet Behavior and Surface Fluctuations in the Meniscusof Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling

CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting

Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation

Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag

Part 3: Fundamental Research of Metallurgical Process

Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels

Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon

Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags

Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel

Part 4: Alloys and Materials Preparation

Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications

Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating

Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition

Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves

Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy

Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel

Part 5: Extraction and Recovery of Metals

Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation

Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method

Direct-to-blister Copper Smelting with the ISASMELT™ Process

Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction

Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process

Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating

Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process

Part 6: Ironmaking and Steelmaking

Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process

Formation Mechanisms of Inclusions in Spring Steels

Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace

Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel

High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process

Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace

Part 7: Treatment and Recycling of Slag/Wastes

Introduction of Matte Droplets in Copper Smelting Slag

Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag

Penetration Depth of Microwave in Tire Rubber

Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags

Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting

Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag

Part 8: Utilization of Complex Ores

Evaluation of Molybdenum Concentrates

Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process

The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature

Roasting of Celestite in Laboratory Scale Rotary Furnace

The Experimental Study of CaCO3 in the Vanadium Extraction Process

The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process

Part 8: Poster I

A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry

A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method

Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum

Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process

Effect of Inner Shape on Blast Furnace Performance for Iron Making

Effect of Lance Configurations on Coal Flow and Combustion Characteristics

Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag

Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel

High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms

Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust

Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace

Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines

Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag

Two-step Copper Smelting Process at Dongying Fangyuan

Part 9: Poster II

Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln

Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction

Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting

Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials

Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace

Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate

Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process

Influence of Hot Charge on Blast Furnace Performance for Iron Making

Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace

Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue

Molecular Dynamics Study of the Structural Properties with Varying

One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis

Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore

Research on the Flow Behavior of Molten Slag through Pore

Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves.

Notes:

Includes bibliographical references at the end of each chapters and indexes.

ISBN:

3-319-51340-0