Light Metals 2017 / edited by Arne P. Ratvik.

Format:

Book

Contributor:

Ratvik, Arne P., Editor.

Series:

The Minerals, Metals & Materials Series, 2367-1696

Language:

English

Subjects (All):

Metals.

Materials--Analysis.

Materials.

Metals and Alloys.

Characterization and Analytical Technique.

Materials Engineering.

Local Subjects:

Metals and Alloys.

Characterization and Analytical Technique.

Materials Engineering.

Physical Description:

1 online resource (XXIX, 1492 p. 1429 illus.)

Edition:

1st ed. 2017.

Place of Publication:

Cham : Springer International Publishing : Imprint: Springer, 2017.

Summary:

The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2017 collection includes papers from the following symposia: Alumina and Bauxite Aluminum Alloys, Processing, and Characterization Aluminum Reduction Technology Cast Shop Technology Cast Shop Technology: Recycling and Sustainability Joint Session Electrode Technology The Science of Melt Refining: An LMD Symposium in Honor of Christian Simensen and Thorvald Abel Engh.

Contents:

Part 1: Alumina & Bauxite: Digestion and Calcination

CFB Alumina Calciners - New and Future Generation Opportunities for Green Field Refineries

Evolutional Development of Alkaline Aluminosilicates Processing Technology

Characterization and Ore Dressing of Bauxite from Brazil

Process Optimization for Diaspore Digestion Equilibrium using Response Surface Methodology

Thermodynamic analysis and formation law of Q phase of calcium aluminate clinker

Leaching Behavior of Alumina from Smelting Reduction Calcium Aluminate Slag with Sodium Carbonate Solution

Part 2: Alumina & Bauxite: Bauxite Residues Technology

Security Disposal and Comprehensive Utilization of Bauxite Residues

Bauxite Residue Amendment Through the Addition of Ca and OR Mg Followed By Carbonation

Application of Tricalcium Aluminate Instead of Lime for the recovery of aluminum in Middle-low Grade Bauxite in Calcification-Carbonization Process

Low Temperature Reduction of Hematite in Red-Mud to Magnetite

Recovery of Iron-, Titanium-bearing Constituents from Bauxite Ore Residue via Magnetic Separation Followed by Sulfuric Acid Leaching

Processing diasporic red mud by the calcification-carbonation method

Research of Flocculants and Dewatering Additives for Filtration of Red Mud

Characterization of activated alumina production via spray pyrolysis

Part 3: Alumina & Bauxite: Non-traditional Resources

New process research on aluminium production from non-traditional aluminum resource by microwave chlorination

Opportunities of pseudoboehmite processing from aluminum content raw material at sintering method

Chemical Alumina Preparation by Using High Alumina Content Fly Ash

A Novel Process of Alumina Production from Low-grade Bauxite Containing Sulfur

Iron separation from bauxite through smelting-reduction process

Thermodynamic behavior of lime desulfurization in sodium aluminate solution

Part 4: Alumina & Bauxite: Poster Session

A study on optimization ofprocessing parameters for synthesis of calcium hydroaluminosulfate using response surface methodology

Part 5: Aluminum Alloys, Processing and Characterization: Alloy Development and Applications

Design of New 6xxx Series Al Alloy Using the CALPHAD Thermodynamic Database

Study of an Al-Ca Alloy with Low Young's Modulus

Production Of 3004 Aluminum Alloy Sheet For Structural Applications From Twin Roll Casting

Aluminum alloys with tailored TiB2 particles for composite applications

Development of low expansion and high strength aluminium hybrid composite

Part 6: Aluminum Alloys, Processing and Characterization: Solidification and Casting

A model for a-Al(Mn,Fe)Si crystals

Casting Characteristics of High Cerium Content Aluminum Alloys

In-situ observation of fragmentation of primary crystals by ultrasonic cavitation in water

The enhancement of mechanical properties of A356 alloy solidified at lower cooling rate via effectively grain refinement

Secondary Aluminum Alloys Processed by Semisolid Process for Automotive Application

Integrated casting-extrusion of an AA6082 aluminum alloy

On Porosity Formation in Al-Si-Cu Cast Alloys

Part 7: Aluminum Alloys, Processing and Characterization: Characterization

Algorithm for Finding the Correlation between the Properties of Wrought Aluminum Alloys, the Chemical Composition and the Processing Parameters

Analysis of an aluminium alloy containing trace elements

Determination of aluminum oxide thickness on the annealed surface of 8000 series aluminum Foil by Fourier Transform Infrared Spectroscopy

Test Uncertainty in Chemical Composition Analysis

Real Time 3D Imaging and Laser Marking System for Industrial Traceability

Production and Certification of Arconic Certified Reference Materials

Characterization of Large Strain Extrusion Machining (LSEM) of AA7050

Interaction between fatigue micro-cracks and inclusion/matrix interface in high-strength Al alloy

Influence of trace element additionson Fe bearing intermetallic solidification of a 6063 Al alloy

Part 8: Aluminum Alloys, Processing and Characterization: Heat Treatment

THE OPTIMIZATION OF THE HOMOGENIZATION TREATMENT OF AA7075

Precipitation modeling and validation of Al-5%Cu-0.4%Mn alloy using quench factor analysis

Young’s modulus of Al-Si-Mg-Cu based alloys under different heat treatment processes

Intergranular Corrosion Investigation on EN-AW 6082 Redraw Rod

The influence of process parameters and thermomechanical history on streaking defects in AA6060 extrusions

Effect of Heat-treatment on Microstructure and Mechanical Properties of Sonicated Multicomponent AlMgSiCuZn Alloy

Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys

Part 9: Aluminum Alloys, Processing and Characterization: Plasticity and Mechanical Behavior

New Yield Criterion for Description of Plastic Deformation of Face-Centered Cubic Single Crystals

Quantifying As-cast and Homogenized AA7050 Mechanical Properties through Compression Testing

Determining a Stable Texture Condition Under Complex Strain Path Deformations in Face Centered Cubic Metals

Microstructural transition and elevated temperature tensile properties of modified Al-Si-Cu-Mg alloys

Effects of alloying elements on anneal-hardening behavior of aluminum alloy foils

Increasing strength and corrosion resistance of AlMgSi alloys by tailor-made thermomechanical processing

Microstructural optimization of a High Mechanical Properties (HMP) aluminum alloy by using CobaPress™ process

Cyclic Stress-strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy

Part 10: Aluminum Alloys, Processing and Characterization: Poster Session

Corrosion of Al-Mg Alloys in Ethanol

Warm pressing of Al powders: an alternative consolidation approach

Part 11: Aluminum Reduction Technology: Dry Scrubbing, Alumina Transport and Dissolution

Spreading of Alumina and Raft Formation on the Surface of Molten Cryolite

Fluoride Capture Capacity of SGA: The Interplay between Particle and Pore Size Distribution

Predictive Formulae for the Competitive Adsorption of HF and SO2 on Smeltergrade Alumina Used in Dry Scrubbing Applications

Pot Gas Treatment at High Gas Temperatures

Influence of Handling Parameter on Powder Properties

Part 12: Aluminum Reduction Technology: Anode Effect and PFC Emissions

Preventive Treatment of Anode Effects Using On-Line Individual Anode Current Monitoring

Reduction in EGA Jebel Ali Potroom GHG Emissions

Partial Anode Effect in a Two-Compartment Laboratory Alumina Reduction Cell

Co-evolution of Carbon Oxides and Fluorides during the Electrowinning of Aluminium with Molten NaF-AlF3-CaF2-Al2O3 Electrolytes

Part 13: Aluminum Reduction Technology: Cell Lining Materials

Chemical stability of thermal insulating materials in sodium vapour environment

AGING OF INSULATING LININGS IN ALUMINIUM ELECTROLYSIS CELLS

Cathode Wear Based on Autopsy of a Shut down Aluminium Electrolysis Cell

SPL Recycling and Re-Processing

Alternative applications of SPL: Testing ideas through experiments and mathematical modeling

Part 14: Aluminum Reduction Technology: Cell Voltage and Pot Control

Clustering Aluminium Reduction Cells

Application of Multivariate Statistical Process Control with STARprobeTM Measurements in Aluminium Electrolysis Cells

Study Of Impact Of The Anode Slots On The Voltage Fluctuations Of Aluminium Electrolysis Cell Using Bubble Layer Simulator

Detecting, Identifying and Managing Systematic Potline Issues with Generation 3 Process Control

Predicting Instability and Current Efficiency of Industrial Cells

Part 14: Aluminum Reduction Technology: Electrolyte and Fundamentals

Sodium in Aluminium as a Cell Performance Indicator: A Quantitative Framework

Bauxite processing via chloride route to produce chloride products and subsequent electrolysis of aluminium chloride to produce aluminium metal

Stability of Chlorides in Cryolitic Electrolyte

Role of Heat Transfer in the Formation of Carbon Oxides in Smelting Cells

Part 15: Aluminum Reduction Technology: Modelling and Cell Design

Improving The Understanding Of BUSBAR Design And Cell MHD Performance

LES turbulence modeling approach for molten aluminium and electrolyte flow in aluminum electrolysis cell

MHD of Large Scale Liquid Metal Batteries

Low energy consumption cell designs involving copper inserts and an innovative busbar network layout

Minimizing Cathode Voltage Drop by Optimizing Cathode Slot Design

Part 16: Aluminum Reduction Technology: Potroom Operations

Crane Electrical Isulation Monitoring in Potlines: New CANDI 4.0 Development

Surviving an Extended Power Outage after a Break Down in the Sub Station

Retrofit of Damaged Corner Risers by Means of Bolted Connections

Theory and Practice of High Temperature Gas Baking Technology for Alumninium Electrolysis Cells

Part 17: Aluminum Reduction Technology: Technology Development

IMPLEMENTATION OF D18+ CELL TECHNOLOGY AT EGA JEBEL ALI SMELTER

Integrating a New Smelter Supervision HMI in Existing Control Systems at ALBRAS

DX+ ULTRA – EGA HIGH PRODUCTIVITY, LOW ENERGY CELL TECHNOLOGY

Potroom HF Emission Reduction by Anode Inert Tray Technology Performances of ALRO Industrial 1st of Class

Enabling efficient heat recovery from aluminium pot gas

The Successful Implementation of AP40 Technology at Kitimat

Part 18: Cast Shop Technology: Continuous Strip Casting

Effect of grain refiners on aluminum twin roll casting process

Influence of Process Conditions on Segregation Behavior in Twin-Roll Casting of an AlFeSi alloy

Effect of Magnesium Content on Microstructure and Mechanical Properties of Twin-Roll Cast Aluminum Alloys

Influence of sticking on the roll topography at twin-roll casting of aluminum alloys

Material Surface Roughness Change in Twin Roll Casti.

Notes:

Includes bibliographical references and indexes.

ISBN:

9783319515410