Proceedings of MPCPE 2022 : Selected Papers / edited by Nikolai Vatin, Svetlana Roshchina, Dmitrijs Serdjuks.

Format:

Book

Author/Creator:

Vatin, Nikolai.

Contributor:

Roshchina, Svetlana.

Serdjuks, Dmitrijs.

Series:

Lecture Notes in Civil Engineering, 2366-2565 ; 335

Language:

English

Subjects (All):

Buildings--Design and construction.

Buildings.

Construction industry--Management.

Construction industry.

Sustainability.

Industrial engineering.

Production engineering.

Building Construction and Design.

Construction Management.

Industrial and Production Engineering.

Local Subjects:

Building Construction and Design.

Construction Management.

Sustainability.

Industrial and Production Engineering.

Physical Description:

1 online resource (362 pages)

Edition:

1st ed. 2024.

Place of Publication:

Cham : Springer International Publishing : Imprint: Springer, 2024.

Summary:

This book gathers selected contributions in the field of civil and structural engineering, as presented by international researchers and engineers at the International Conference on Materials Physics, Building Structures and Technologies in Construction, Industrial and Production Engineering (MPCPE), held in Vladimir, Russia, on April 26–28, 2022. The book covers a wide range of topics including the theory and design of capital construction facilities, engineering, and hydraulic structures; development of innovative solutions in the field of modeling and testing of reinforced concrete, metal, and wooden structures, as well as composite structures based on them; investigation of complex dynamic effects on construction objects, and many others directions. Intended for professional builders, designers, and researchers. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

Contents:

Intro

Preface

Contents

Three-Dimensional Stress State of Earth Dams Under Static Loads

1 Introduction

2 Methods

3 Results and Discussion

3.1 Evaluation of the Stress-Strain State of Earth Dams

3.2 Strength Assessment of Earth Dams

4 Conclusions

References

Corrosion of Steel Reinforcement in Hydrophobized Concrete Under the Influence of Aggressive Chloride-Containing Medium

2 Materials and Methods

4 Conclusion

Modular Construction. Modular Ventilated Façade Concept

2 Method

3.1 The Modular Ventilated Façade Concept

3.2 Determination of the Reduced Wall Thickness of the Section (Thermoprofile TS150-50-2.0)

Thermal Characteristics of a Modular Additive Enclosing Structure

3.1 Calculation of the Heat Transfer Coefficient of the Structure

3.2 Study of Thermal Engineering Heterogeneity of the Structure

5 Funding

Stability of the Right-Bank Slope of the Oka River

Seismic Isolation of NPP Turbine Unit Using Dry Friction Devices

2 Research Methods

Damageability Analysis of Industrial Building Structures

3 Results

Concept of the Innovative Model of Architecture Formation of the «Smart» Redistribution of Single-Phased Electric Network

1 Current Problems of the Electric Supply Industry and Methods of Their Solution

2 Conceptual Framework

3 Descriptive Examples of Calculations

4 System's V2 and V3 Options

4.1 V2 Option.

4.2 V3 Option

5 MCU Device and Its Behavior

6 Conclusion

Thermal Stress State of a Massive Concrete Slab in the Winter Building Period

4 Discussion and Conclusion

Shear Crack Resistance of I-Shaped Concrete Beams with Basalt FRP Stirrups

2 Experimental Program

2.1 Test Specimens

2.2 Material Properties

2.3 Instrumentation, Test Setup and Procedure

Control Tests of Long-Span Laminated Timber Structures with Nodes on the Glued-In Rods

2 Control Tests

3 Examples of Control Tests

3.1 The Main Building of the Country Hotel in the Village of Lipki

3.2 Farms at the Manezh Exhibition Center, Moscow

3.3 L-shaped Trusses with a Span of 48 m

Conceptual Design a Mobile Agricultural Settlement by Geometric Modeling

3 Results and Discussions

3.1 Analysis of Problem

3.2 Land Allocation Projects

3.3 Geometric Modeling the "Mobile Agricultural Sattlement"

Reinforced Concrete Structures for the "Harmonica" Resistance Model in Bending with Torsion

2 Working Assumptions of the Deformation Model

3 Solving Equations

Improvement of Methods of Inspection of Steel Structures of Overhead Power Line

2 Technical Inspections to Improve the Reliability of Overhead Lines

3 Method for Determining the Corrosion Wear of Steel Structures of Overhead Lines

4 Methodology of Inspection of Steel Structures of Overhead Line Supports

5 Conclusions and Suggestions

References.

Square-Section Tube-Concrete Structures Studying Under Axial Compression Both with Spiral Reinforcement of the Concrete Core and Without Reinforcement

1 Research Methods

2 The Measurement Error Determination by the Tensoresistive Method

3 Research Results

Investigation of the Stress-Strain State of Wooden Beams with Rational Reinforcement with Composite Materials

Strength and Deformability of Butt Joints Made of Wood with Local Modification

Physical and Mechanical Properties of Coniferous Wood After Exposure to Fire

3.1 Study of Physical Properties

3.2 Results of Mechanical Tests

Studies of Screw Behavior in Modified Wood

Numerical Study of a Wood-Composite Beam Structure

3 Linear Calculation

4 Results and Discussion

5 Nonlinear Calculation

6 Conclusions

Determination of Local Stresses in Places Where the Stiffness of Reinforced Wooden Beams Changes

Compressive Strength Along and Across Wood Fibers Modified by a Polymer Composition with a Nanostructured Filler

Strength Properties of Wood for Cleavage on Tangential and Radial Planes Impregnated with a Polymer Composition Based on Dimethacrylic Polyester

Investigation of the Bending Bearing Capacity for Wood Modified with Polymers with Nanoparticle Filler

Mechanical Properties of Polymer Composition Based on Dimethacrylic Polyester with Nanostructured Filler for Wood Modification

Tensile Strength of Wood Modified Polymer Composition with Carbon Nanotube Filler

Strength and Stability of a Double Curvature Vaulted Shell

Comparative Evaluation of Aluminum Alloys for the Manufacture of Connecting Systems in Building Structures

2 Materials and Research Methods

3 Selection and Justification of Grades of Aluminum Alloys for Modeling

4 Simulation Results

5 Conclusions

Mechanical Behavior of Aluminum Matrix Composites in the Elements of Building Structures

Composites for Bricklaying and Decorative Elements

Soil Compositions Based on Binders from Carbonate Waste Rocks

2.1 Materials

2.2 Methods

3.1 Research Results

3.2 Compositions of the Obtained Soil-Concrete Compositions

3.3 Results of the Conducted Research

Utilization of Dolomite Waste from the Vladimir Region for the Synthesis of Concrete

3 Results and Discussion.

4 Conclusions

Magnesia Cements Based on Trepel and Diatomite of the Vladimir Region

4 Discussion of the Results

Author Index.

Notes:

Description based on publisher supplied metadata and other sources.

ISBN:

3-031-30570-1

OCLC:

1405946148