Light Metals 2023 / edited by Stephan Broek.

Format:

Book

Author/Creator:

Broek, Stephan, author.

Series:

The Minerals, Metals & Materials Series, 2367-1696

Language:

English

Subjects (All):

Metals.

Building materials.

Electronics--Materials.

Electronics.

Materials--Fatigue.

Materials.

Materials--Analysis.

Metals and Alloys.

Steel, Light Metal.

Electronic Materials.

Materials Fatigue.

Materials Characterization Technique.

Local Subjects:

Metals and Alloys.

Steel, Light Metal.

Electronic Materials.

Materials Fatigue.

Materials Characterization Technique.

Physical Description:

1 online resource (1335 pages)

Edition:

1st ed. 2023.

Place of Publication:

Cham : Springer Nature Switzerland : Imprint: Springer, 2023.

Summary:

The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2023 collection includes contributions from the following symposia: · 60 Years of Taking Aluminum Smelting Research and Development from New Zealand to the World: An LMD Symposium in Honor of Barry J. Welch · Alumina & Bauxite · Aluminium Industry Emissions Measurement, Reporting & Reduction · Aluminium Waste Management & Utilisation · Aluminum Alloys, Characterization and Processing · Aluminum Reduction Technology · Cast Shop Technology · Electrode Technology for Aluminum Production · Scandium Extraction and Use in Aluminum Alloys.

Contents:

Intro

Preface

Contents

About the Editor

Program Organizers

Aluminum Committee 2022-2026

Part I 60 Years of Taking Aluminum Smelting Research and Development from New Zealand to the World: An LMD Symposium in Honor of Barry J. Welch

1 What Makes TMS Special? Let Us Consider a Case Study in Volunteer Excellence: Barry J. Welch

2 Meeting the Requirements of Potline Customers: The Largely Unmet Challenges Set by Barry Welch to Carbon Anode Producers

3 The Need to Respect the Interlink Between Science, Physics, and Cell Design in an Environmentally Responsible Manner: The Next Big Challenge for Aluminium Smelting

4 Anode Quality Optimisation: Industry Learnings from the Research Supervised by Barry Welch

5 Process Recovery to Unlock Power Efficiency Improvement at BSL

6 A Smart Individual Anode Current Measurement System and Its Applications

7 Light Metals Research at the University of Auckland

8 Impact of Aluminium Reduction Cell Parameters on Feeder Hole Condition

9 A Dynamic Coupled Mass and Thermal Model for the Top Chamber of the Aluminium Smelting Cells

10 Following Alumina Dissolution Kinetics with Electrochemical and Video Analysis Tools

11 Monitoring Cell Conditions and Anode Freeze Dissolution with Model-Based Soft Sensor After Anode Change

12 EGA's First Holistic Mobile Application for Smelter Operations

13 Testing Feeding Alumina in Three Channels in a Wide Cell

14 A Pragmatic Model for Bath Temperature Evolution During Alumina Feeding

15 A New Strategy for Transient Heat Transfer Models with Phase Change for the Aluminum Electrolysis Industry

16 A Discussion on Thermal Impact of Anode Change in Aluminum Reduction Cell

17 Development and Deployment Measures in PLC-Based Pot Control System at Low Amperage Aluminium Reduction Cell.

Part II Alumina and Bauxite

18 Process Simulation with Tertiary Cyclone for Kaolinite Removal from Amazonian Bauxite

19 Granulometry Impact on Digestion Efficiency and Cost-Economics in Alumina Refinery for East Coast Bauxite (India)

20 Effect of Thermal Activation Temperature on Pre-desilication of Low-Grade Bauxite

21 Application of Repeatability and Reproducibility Analysis in the Determination of Available Alumina and Reactive Silica in Bauxites

22 Zero Waste Alumina Production

23 Statistical Modelling of Operating Parameters on Bauxite Slurry Hyperbaric Filtration

24 Reduction of GHG Emissions and Increase Operational Reliability Using Immersed Electrode Boiler in an Alumina Refinery

25 Steam Grid Stability Using Advanced Process Control and Real Time Optimization in an Alumina Refinery

26 Effects of Impurities on the Boiling Point of Bayer Liquor

27 Effects of Different Precursors on the Preparation of β″-Al₂O₃

28 Determination of Unit Cell Parameters of α-Alumina Reference Material

29 Improvement Seminars: Continuous Improvement and People's Engagement to Support Sustainability

30 Turning Bauxite Residue to Metal Adsorption Materials Through a Low-Cost Approach

31 Hematite and Anatase Conversion to Magnetic Phases During Reductive Re-digestion of Gibbsitic Bauxite Residue

32 Digestion Efficiency Improvement of Gibbsite-Boehmite Bauxite

33 Decanter Centrifuge for Dewatering Bauxite Tailings

Part III Aluminum Alloys, Characterization, and Processing

34 Comparison of TiB2 and TiC Grain Refiners' Impact on Surface Quality, Edge Cracking, and Rolling Performance of AA5182 DC-Cast Ingot

35 The Influence of Crystallographic Texture Gradients on the Deformation Response of Aluminum Extrusions.

36 Mechanical Properties, Microstructures, and Textures of Cold Rolling Sheets Made from a Low-cost Continuous Cast Al-1.5Cu Alloy with Potential Application in Auto Sheets

37 Challenges in the Production of 5754 Automotive Alloy Sheet via Twin Roll Casting Route

38 Fabrication of Bright-Rolled Aluminum Suitable for Design Elements in the Automotive Industry

39 Effects of Aging Conditions on Fracture Characteristics of Al-Mg-Si Alloys

40 Evaluation of EN AW 3003 Aluminium Alloy Homogenization with Specific Electrical Resistivity Measurement

41 The Effect of Octagonal Ingot Shape on AA6xxx Hot Rolling Performance

42 The Low-Carbon Production of Wrought Aluminum Alloys Based on Post-consumer Scrap

43 Reduce Inclusion Level Study in Aluminum Slab Products 3XX and 5XX

44 Effect of Iron and Manganese Content on Microstructure and Mechanical Properties of AlSi11 Alloy in Wheels Produced by LPDC-Process

45 Shear Assisted Processing and Extrusion of Unhomogenized Aluminum Alloy 6063 Castings with High Iron Content

46 Solutionization via Severe Plastic Deformation: Effect on Natural Aging in an Al-Mg-Si-(Mn) Alloy

47 Manufacture of Nano-to-Submicron-Scale TiC Particulate Reinforced Aluminium Composites by Ultrasound-Assisted Stir Casting

48 Effect of Mn Content on Quench Sensitivity of 6082 Alloys

49 Characterization of Aluminum Conductors Steel Reinforced in Overhead Transmission Lines

50 Mechanical and Electrical Properties of Permanent Steel Mold Cast Eutectic Al-1.8Fe Alloy

51 Effects of the Friction Stir Welding Sliding and Sticking Mechanisms on the Microhardness, Texture, and Element Concentration

52 Experimental Investigation of the Effect of High-Temperature Shot Peening on the Surface Integrity of 7010-T7452 Aluminum Alloy.

53 Quality Assessment and Features of Microdrilled Holes in Aluminum Alloy Using Ultrafast Laser

54 Surface Characterization Methods to Evaluate Adhesive Bonding Performance of 6xxx Automotive Alloys

55 Investigation of Resistance of Intergranular Attack for Various Heat Treated 2011 Alloys After Hard Anodizing

56 Fundamental Study on Modified Solidification of 1370 and ALSI7 with and without Commercial Grain Refiners

57 Improving the Mechanical Properties of Cast Aluminum via Ultrasonication-Induced Microstructural Refinement

58 Microstructural Changes on a Ternary Al-Cu-Si Eutectic Alloy with Different Pre-heated Mold Temperatures

59 Nanoparticle-Enhanced Arc Welding of Aluminum Alloys

60 Phase Equilibria in Al-Fe Alloys

61 Secondary Phase Refinement in Molten Aluminum via Low Power Electric Current Processing

62 Fluidity and Microstructural Analysis of Al-Ni Alloys with Varied Ni Concentrations

63 Effect of Ti Addition on the Microstructure and Mechanical Properties of Hypo-Eutectic and Eutectic Al-Si Alloys

64 Compatibility Study of Polymeric Binders for Aluminum Binder Jet Parts

65 Material Evaluation Framework of Additive Manufactured Aluminum Alloys for Space Optical Instruments

66 Comparison of Additively Manufactured and Cast Aluminum A205 Alloy

67 The Role of Ti and B Additions in Grain Refinement of Al-Mn Alloy During Laser Additive Manufacturing

68 AMAG CrossAlloy®-A Unique Aluminum Alloy Concept for Lightweighting the Future

69 Effect of Alloying Elements on Corrosion Resistance of Quench-Free Al-Ca Alloys for HPDC

70 Influence of Increased Cu and Fe Concentrations on the Mechanical Properties of the EN AB-42100 (AlSi7Mg0.3) Aluminum Alloy.

71 Temperature Dependence of Lattice Misfit in Determining Microstructural Evolution of High Temperature High Strength Aluminium Alloys-A 3D Phase-Field Study

72 Microstructure and Mechanical Properties of an Al-Mn-Si Alloy Microalloyed with Sn

73 Innovative Approaches in Development of Aluminium Alloys for Packaging Industry

74 The Role of Microstructure on Strength and Fracture Anisotropy Effects in Al-Mg-Si Extrusion Alloys

75 Comparison of Experimental Test and Finite Element Simulations of Car Crash Boxes Manufactured with Different Aluminum Alloys

76 Exploring Semi-solid Deformation of Al-Cu Alloys by a Quantitative Comparison Between Drained Die Compression Experiments and 3D Discrete Element Method Simulations

77 The Role of Through-Thickness Variation of Texture and Grain Size on Bending Ductility of Al-Mg-Si Profiles

78 Anisotropy of Tearing Behavior in AA7075-T6 Sheet at 200 °C

79 Evaluating the Earing Amount of Materials Under Various Chemical Composition and Heat Treatment Processes with Finite Element Simulations of Cup Drawing Tests

80 Effect of Al-3Ti-1B-1.5Ce Refiner on Microstructure and Mechanical Properties of A356 Aluminum Alloy

81 Effect of Al-Ti-B Refiner on Microstructure and Properties of A356 Alloy by Continuous Rheo-Extrusion

82 Effect of Annealing Process on Recrystallization Microstructure and Properties of 1235D Aluminum Alloy Sheet

83 Effect of Thermal Treatment (T5) on Microstructure and Tensile Properties of Vacuum High Pressure Die Cast Al-Si-Mg Alloy

84 Numerical Simulation of Flow of Liquid in Molten Pool of Twin-roll Casting Rolling 5182 Aluminum Alloy Strip

85 Study of the Solidification Behavior and Homogenization Heat Treatment of the Investment-Cast Al-Cu Foams: Experimental and Modelling Investigations.

Part IV Aluminum Industry Emissions Measurement, Reporting, and Reduction.

Other Format:

Print version: Broek, Stephan Light Metals 2023

ISBN:

9783031225321